| Allicdata Part #: | RMA.01.250.DLM-ND |
| Manufacturer Part#: |
RMA.01.250.DLM |
| Price: | $ 0.00 |
| Product Category: | Connectors, Interconnects |
| Manufacturer: | LEMO |
| Short Description: | CONN ADAPT JACK TO JACK 50 OHM |
| More Detail: | Adapter Coaxial Connector NIM-CAMAC CD/N 549 Jack,... |
| DataSheet: |  RMA.01.250.DLM Datasheet/PDF |
| Quantity: | 1000 |
| Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
| Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
| 1 +: | 0.00000 |
| Impedance: | 50 Ohm |
| Mating Cycles: | -- |
| Dielectric Material: | Polyetheretherketone (PEEK) |
| Center Contact Material: | Bronze |
| Body Finish: | Gold |
| Body Material: | Brass |
| Features: | -- |
| Center Contact Plating: | Gold |
| Ingress Protection: | IP50 - Dust Protected |
| Fastening Type: | Push-Pull, Push-Pull |
| Mounting Type: | Free Hanging (In-Line) |
| Style: | Straight |
| Series: | -- |
| Convert To (Adapter End): | NIM-CAMAC CD/N 549 Jack, Female Socket |
| Convert From (Adapter End): | NIM-CAMAC CD/N 549 Jack, Female Socket |
| Center Gender: | Female to Female |
| Adapter Series: | NIM-CAMAC CD/N 549 to NIM-CAMAC CD/N 549 |
| Conversion Type: | Same Series |
| Adapter Type: | Jack to Jack |
| Moisture Sensitivity Level (MSL): | -- |
| Part Status: | Active |
| Lead Free Status / RoHS Status: | -- |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RMA.01.250.DLM is a type of coaxial connector. This connector, belonging to the RF adapter connector series, is commonly used in electronic applications that require transmission of radio frequency (RF) signals.
The RMA.01.250.DLM is composed of two parts: the receiver connector and the threaded sleeve. The sleeve threads securely into the receiver connector, locking it in place. The receiver connector has a locking ring that slides up and down. When the locking ring is in the up position, it locks the receiver connector in place, preventing it from coming off if the connector is bumped or jostled.
The RMA.01.250.DLM has a wide frequency range, from DC to 6 GHz. Its small size makes it ideal for applications where space is limited. The connector also has a low insertion loss, so it is able to transmit signals with minimal loss.
The RMA.01.250.DLM\'s working principle is based on the principle of a coaxial cable. A coaxial cable is a type of electrical cable consisting of an inner conductor surrounded by an insulating material called the "dielectric." The dielectric is then surrounded by a metallic shield made of a conducting material called the "shield." This shield blocks out any external interference and makes sure that only the signal intended for the connector is sent through.
The RMA.01.250.DLM, like all coaxial connectors, can be used to transmit signals of various frequencies. This makes them suitable for use in a wide range of applications, such as computers, video displays, audio and video signals, and television receivers. The low insertion loss of the RMA.01.250.DLM makes it ideal for applications where precision is of the utmost importance.
In short, the RMA.01.250.DLM is a coaxial connector used to transmit RF signals in electronic applications. The small size and low insertion loss make it ideal for applications where space is limited and precision is key.
The specific data is subject to PDF, and the above content is for reference
CONN ADAPT JACK-JACK TNC 50 OHMAdapter C...
ADAPT3.50MM PLUG - N JACKAdapter Coaxial...
ADAPT3.50MM JACK - N PLUGAdapter Coaxial...
ADAPT3.50MM JACK - N JACKAdapter Coaxial...
CONN ADAPT PLG-JCK TRS TWIN/TRIAdapter C...
CONN ADAPT COAX PLUG TO SMA JACKAdapter ...