RN-800S-CB

Serial Interfaces:	USB
Package / Case:	Module
Operating Temperature:	--
Mounting Type:	Surface Mount
Current - Transmitting:	75mA
Current - Receiving:	75mA
Voltage - Supply:	6 V ~ 12 V
Memory Size:	--
Utilized IC / Part:	--
Antenna Type:	Integrated, Chip
Series:	--
Sensitivity:	--
Power - Output:	16dBm
Data Rate:	--
Frequency:	2.4GHz
Modulation:	--
Protocol:	Bluetooth v2.0
RF Family/Standard:	Bluetooth
Part Status:	Discontinued at Digi-Key
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

RF Transceiver Modules are widely used in many industries. The RN-800S-CB is one type of RF Transceiver Modules that can be used in both low power short-range communications and high power long-range communications. It is a low-power, radiation-hardened, compact transceiver module that combines RF transmit and receive functions, synthesized frequency controller, CAN bus controller and a host of features for simple and reliable operation. This article discusses the application field and working principle of the RN-800S-CB.

Application Field

The RN-800S-CB is suitable for a variety of applications since it is designed for robust operating conditions with low power consumption. Its small size allows for easy integration into applications such as industrial control systems, wireless sensors, consumer electronics, and even medical devices. The RN-800S-CB offers a choice of 900 MHz, 2.4 GHz or 5.8 GHz frequencies for maximum flexibility. It is fully compliant with different industry standards, including FCC Part 15, European ETSI EN 300-008 and Japan ARIB STD-T71. Additionally, developers can customize the FCC logo and channel selection feature according to their specific application needs.

Working Principle

The RN-800S-CB operates on a Frequency Modulated (FM) basis, which offers robust operation and low cost. It enables your product to communicate with other similar devices within a transmission range of up to 1km, depending on the application and communication link. The module is triggered to transmit when a signal is sent from the transmitter. After the transmission is finished, the receiver will start to capture the signal. The RF signal then passes through the frequency filter and the data is then demodulated. The demodulated data is digitalized and sent to a microcontroller for further processing. The RN-800S-CB has data rate ranging from 300bps to 153.6Kbps, and supports point to point as well as star network topologies. It also supports Forward Error Correction (FEC) and Automatic Frequency Control (AFC), allowing for reliable communication even in environment that are prone to noise interference.

Advantages

The RN-800S-CB is a reliable and cost-effective solution for short-range communication applications. It is suitable for use in harsh environments as it provides reliable operation in temperatures ranging from -40°C to +85°C with no additional components. Additionally, the module’s compact form factor makes it ideal for integration into a variety of small device designs. The RN-800S-CB also offers easy setup and configuration, reducing development cycles. Its failure detection features such as Automatic Frequency Control (AFC) and Forward Error Correction (FEC) allow for quick and robust operation in noisier environments.

Conclusion

The RN-800S-CB is an ideal solution for short-range communication applications that require low power consumption and robust operation in harsh environments. Its compliance with various standards, easy setup and configuration, and cost-effective features make it ideal for integrating into a variety of consumer electronics, industrial control systems and medical devices.

The specific data is subject to PDF, and the above content is for reference