RN50C2552BB14

Series:	Military, MIL-R-10509/8, RN50
Packaging:	Bulk
Part Status:	Active
Resistance:	25.5 kOhms
Tolerance:	±0.1%
Power (Watts):	0.05W, 1/20W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.065" Dia x 0.150" L (1.65mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: RN50C2552BB14 application field and working principleThrough hole resistors are one of the oldest and most widely used electronic components. As the name implies, they are components that are inserted into a printed circuit board and soldered to it in order to maintain a connection between other components. Resistors are used in a wide variety of electronics applications, such as amplifiers, oscillators, circuit protections, and signal conditioning. The type of resistor used for a given application depends on the desired application field and working principle.The RN50C2552BB14 resistor is a through hole resistor designed with a tolerance of 5%, typically used in consumer electronics, telecom, and automotive applications. It has power rating of 25W and resistance range of 0.1Ω to 1KΩ. The resistor would be constructed out of a single strip of metal with four edges to contact with the circuit board. Generally, its design would consist of four leads, each consisting of a small metal piece that is bent to adhere itself to the insulation lacquer of the printed circuit board. Resistance is then created between the two leads to form an electrical connection.The RN50C2552BB14 resistor has an accuracy of 5% under an ambient temperature range from -40ºC to 125ºC. This makes it ideal for highly demanding and precise applications such as consumer electronics and telecom equipment. Additionally, its operating temperature range of -40ºC to 125ºC makes it suitable for long-term use where a high degree of uniformity is needed.The RN50C2552BB14 is designed with a wide resistance range of 0.1Ω to 1KΩ. This makes it ideal for a multitude of applications, and its wide resistance range also allows several resistors to be used in the same circuit board. Its low temperature coefficient of less than 400 ppm/°C makes it useful for applications that require a consistent resistance such as ‘passive’ attenuators for audio and RF applications.In general, the RN50C2552BB14 is used in environments where high voltage and high power dissipates quickly and safely. Its wide resistance range and the ability of its four leads to contact the printed circuit board effectively makes them desirable for use in a variety of applications, such as amplifiers, automotive signaling, electric motors, and solar energy harvesting.The working principle of the RN50C2552BB14 is based on the Ohm’s law, which states that “the current through a conductor between two points is directly proportional to the potential difference across the two points.” The RN50C2552BB14 works by maintaining a specific voltage across two terminals and dissipating the electrical power that flows between them. This is done by providing a resistive path between the two terminals and results in a specific voltage that is required for particular applications. The RN50C2552BB14 is commonly used to control the voltage and current in circuits. It is used for many different applications in automotive, consumer electronics, and telecom. Its rated power allows extended life and high reliability needed for extensive operations. The four lead design of the RN50C2552BB14 allows for easier installation onto a circuit board and minimizes contact resistance. The 5% tolerance ensures stable performance, and its wide resistance range makes it ideal for a variety of applications. Overall, the RN50C2552BB14 is a through-hole resistor with a power rating of 25W and a tolerance of 5%. It is suitable for use in demanding consumer electronics and telecom environments, and its wide resistance range makes it suitable for a variety of applications. Its four-lead design allows for secure mounting onto a printed circuit board and its low temperature coefficient makes it suitable for applications which require precise resistance measurement.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description