RN50C57R6FBSL

Series:	Military, MIL-R-10509/8, RN50
Packaging:	Bulk
Part Status:	Active
Resistance:	57.6 Ohms
Tolerance:	±1%
Power (Watts):	0.05W, 1/20W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.065" Dia x 0.150" L (1.65mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
The RN50C57R6FBSL is a through-hole resistor, commonly used for various applications. Its working principle involves the resistance of electric current which is passed through it. The resistor is made from a wide variety of materials, and its resistance is measured in Ohms. The resistor has a metal layer above the substrate material, which acts as a conductor when a voltage is applied to it, thus providing the necessary resistance to the circuit.Types of Through-Hole Resistor
There are three main types of through-hole resistors: Fixed Type Resistors, Variable Type Resistors, and Adjustable Type Resistors. Fixed type resistors are generally used in applications where a particular resistance value is needed and cannot change, such as limiting the amount of current that can pass through a circuit. Variable type resistors are used when the resistance needs to be changed for various reasons, such as changing the brightness of a light bulb. Adjustable type resistors are used when the desired range of resistance needs to change, such as controlling the speed of a motor.Construction of RN50C57R6FBSL
The RN50C57R6FBSL is constructed using an aluminum film layer with an oxide coating which acts as the resistive component. The metal layer is placed on top of the substrate where the resistor is mounted and insulated. The layers are also laminated together so that no metal corrodes quickly. The resistor also has a protective coating which prevents the resistor from shorting out in humid or wet conditions.Working Principle of RN50C57R6FBSL
The working principle of the through-hole resistor is governed by Ohm\'s Law, which states that the current passing through a resistor is directly proportional to the voltage applied and inversely proportional to the resistance of the resistor. The RN50C57R6FBSL resistance is determined by the thickness of the film layer, and the amount of current it can handle depends on the temperature rating of the resistor. When a voltage is applied, the electrons in the metal layer move and create an electric field, which is then resisted by the film layer. This action creates the resistance of the resistor.Applications of RN50C57R6FBSL
The RN50C57R6FBSL is commonly used in various applications due to its adjustable value and wide range of resistances. It is commonly used for controlling power supply levels, such as voltage regulators, and can be used for voltage or current limiting in circuits. It can also be used for measuring signals, such as temperature and pressure sensors. It is also widely used in automotive electronics, as it can be used for tweeter and amplifier protection. In addition, these resistors can be used in high-frequency switching applications, such as inverters and switch-mode power supplies.Conclusion
The RN50C57R6FBSL is a through-hole resistor which is commonly used in various applications. Its working principle involves the resistance of electric current passed through the resistor. The metal layer on the substrate acts as a conductor and the resistance is determined by the thickness of the film layer. The resistor can be used for a wide range of applications, including controlling power levels, measuring signals, and protecting components in automotive electronics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description