RN50C62R6BR36

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

RN50C62R6BR36 is a type of through hole resistor, which is designed to provide support for wiring in electrical systems. Through hole resistors are one of the most common components used in many types of electronic systems. They are ideal for applications requiring a low resistance value or fast response time.

These resistors are typically made from a round body with two or more longitudinal slots, spaced around the circumference, that divide the body into segments. A negative or positive charge can be passed through the resistor, which will cause a resistance to the current, between the two segments. This resistance is known as the resistance of the resistor.

The RN50C62R6BR36 through hole resistor offers reliable performance and a wide range of working principles. It is designed to operate from ±10V and can be used in a number of operating conditions, including AC and DC power supplies.

The resistor requires an active current source to pass a current through it. In some applications, the resistor can be wired in parallel to other components to create parallel resistance. In this scenario, the resistance of the resistor is proportional to the voltage across it, which is referred to as the current-limiting resistor. This enables the current to be controlled in a regulated manner across a range of current values.

In other applications, the resistor can be used to provide a fixed voltage, such as in a voltage regulator. A fixed voltage is essential for many applications, as it can prevent over-voltage or under-voltage conditions. The resistor can also be used to protect a circuit from overload or short-circuit conditions.

The RN50C62R6BR36 through hole resistor is often used in areas where high currents are encountered. This includes applications connected to high-current switches, electric motors, and battery powered devices. It is also used in AC/DC rectifiers, where rectifier diodes and rectifier bridges are used to regulate voltage and current in a system.

The resistor is also commonly used to control the current in a single pole switch, such as a switch to be used for a motor, a heater, or a lamp. In this application, the resistor is placed in the switch and controls the current when the switch is on. When the switch is off, the resistor does not affect the current.

The RN50C62R6BR36 through hole resistor is also used in applications that require higher power output, such as for automotive electronics. For these applications, the resistor is designed to pass large current levels while also dissipating heat very efficiently. The resistor can also be used in a system to control the current to the output terminals.

The resistor is also suitable for applications where a high capacitance is required. It can be used to change the capacitance in a capacitor, which will alter the resistance of the resistor. This allows the resistor to be used for changing the signal strength or gain in a circuit.

The RN50C62R6BR36 through hole resistor is a reliable and versatile component that can be used in many different applications. It is easy to install and provides reliable performance, even in harsh environments. It is a great choice for a wide range of applications, including controlling the current, providing protection from overload or short-circuit conditions, and regulating the voltage in a regulated system.

The specific data is subject to PDF, and the above content is for reference