RN50C9761FB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors play an important role in various electronics, and the RN50C9761FB14 is one of them. This type of resistor, also known as a linear or variable resistor, can be used to control the power being supplied to a variety of electronic components.

The RN50C9761FB14 is a through-hole type resistor that has better heat dissipation qualities than chip-type resistors due to its large size. It is designed to be mounted and secured with a nut and washer. It uses a copper-clad aluminum material for the insulation layer, which allows for higher current for the same resistance. The resistor is further protected by an epoxy resin coating and a varnish layer over the solder contacts. This combination of materials makes it resistant to shock and vibration, and it can withstand temperatures up to 200°C.

The RN50C9761FB14 is used in a variety of applications, from power supplies and LED lighting to automotive electronics. It can be used in power supplies to regulate the voltage and current, as well as provide protection against overloads and short circuits. It is also commonly used in LED lighting applications because of its ability to dissipate heat more efficiently. For automotive electronics, through-hole resistors are used in ECUs, airbag systems, electric-hydraulic brake systems, air conditioner controllers, and more.

To understand the working principle of the RN50C9761FB14, one must first understand the basics of electricity, particularly Ohm’s Law. Ohm’s Law states that the current through a conductor is directly proportional to the voltage across it, and inversely proportional to the resistance. In other words, when voltage is applied across a resistor, it will oppose the flow of current, or in other words, “resist” it. This opposition can be controlled simply by adjusting the resistance value. The RN50C9761FB14 has a resistance value of 50KΩ, which provides resistance for currents up to 1A.

The RN50C9761FB14 is used in various applications to control the voltage and current. By changing the resistance of the resistor, the amount of voltage and current being supplied to the component can be altered. This allows engineers to fine-tune the performance of an electronic circuit, and also provides protection for sensitive components in the event of an overload or a short circuit.

In conclusion, the RN50C9761FB14 is a through-hole resistor with a resistance value of 50KΩ, which can handle a maximum current of 1A, and offers superior heat dissipation properties compared to chip-type resistors. The resistor is encapsulated with a protective epoxy resin, as well as a varnish layer on the solder contacts, which makes it resistant to shock and vibration. Common applications for this resistor include power supplies, LED lighting, and automotive electronics. The working principle of the resistor involves using Ohm’s Law to adjust the amount of current passing through it by changing the resistance value.

The specific data is subject to PDF, and the above content is for reference