RN50E2002BB14

Series:	Military, MIL-R-10509/8, RN50
Packaging:	Bulk
Part Status:	Active
Resistance:	20 kOhms
Tolerance:	±0.1%
Power (Watts):	0.05W, 1/20W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.065" Dia x 0.150" L (1.65mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through hole resistors are one of the oldest and most widely used electrical components in the world. The RN50E2002BB14 is a standard through-hole resistor with a resistance of 2K Ohms. This resistor is used in a variety of applications including power supplies, voltage regulation, protection devices, and as part of circuits for controlling and measuring electrical signals. In this article, we will look at the application field of RN50E2002BB14, and discuss its working principle.

Application Field

The RN50E2002BB14 can be used in any application where it is necessary to adjust the amount of current that is allowed to pass through a particular circuit. For example, it can be used in power supplies to limit the amount of current drawn and to regulate the voltage in the circuit. It can also be used as part of protection devices, which reduce the amount of current, protecting both the components and the circuit. Additionally, it can be used in circuits designed for controlling and measuring electrical signals, providing a stable and accurate means of controlling the desired current level.

Working Principle

The RN50E2002BB14 is made up of two terminals and has a resistance value of 2K Ohms. When voltage is applied to the terminals, the resistor will oppose the flow of current through the circuit. The amount of resistance that is provided by the resistor depends on its value, with higher values providing more resistance. This resistance can be adjusted by changing the amount of voltage applied to the terminals.When used as part of a circuit, the resistor helps to regulate the flow of current and protect against fluctuations in the voltage. It also prevents too much current from flowing, thus avoiding damage to the device or circuit.

Conclusion

The RN50E2002BB14 is a standard through-hole resistor with a value of 2K Ohms. This resistor can be used in a variety of applications where it is necessary to adjust the amount of current that is allowed to pass through a particular circuit. It works by opposing the flow of current through the circuit based on the amount of voltage applied to the terminals. This helps to regulate the current flow, protect against voltage fluctuations, and prevent too much current from flowing, thus avoiding damage to the device or circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description