RN50E20R0FB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A through hole resistor is a type of resistor designed to be mounted on a printed circuit board (PCB) and provide electrical resistance in an electronic circuit. The RN50E20R0FB14 is a through hole resistor that features a carbon-film construction, a power rating of 0.2 watts at 70°C, a nominal resistance of 50 ohms, and a ±5% tolerance. It can be used in a wide variety of applications, including temperature sensors, motor control, timer circuits, voltage regulators, and audio preamps. This article will provide an overview of the RN50E20R0FB14\'s application field and working principle.

The RN50E20R0FB14 is a through-hole resistor specifically designed for PCB applications. It has a 50 ohm resistance, a power rating of 0.2 watts, and a ±5% tolerance. The resistor is constructed with a thin-film, semi-conductor material, which allows for the uniform electrical flow and accurate resistance values. The resistance value of the RN50E20R0FB14 is stable over time and temperature changes, making it suitable for long-term reliability and performance. The resistor is encased in an epoxy coating for additional protection against vibrations, moisture, dust, and dirt.

The RN50E20R0FB14 is suitable for a variety of electrical applications, including temperature sensors, motor control, timer circuits, voltage regulators, and audio preamps. The resistor can be used in temperature sensors to condition and limit the current in the sensor device, allowing it to accurately measure and monitor temperatures. In motor control, the RN50E20R0FB14 is commonly used to ensure proper operation of motors by controlling the amount of current that is allowed to the motor. Timer circuits require accurate and reliable resistors to perform their specified functions and the RN50E20R0FB14 meets this requirement. The resistor is also used in audio preamps as part of the circuit design to control the volume and shape the sound.

The working principle of the RN50E20R0FB14 is based on the principle of electricity. The resistor works by reducing the flow of current that passes through it. This is done by introducing a resistance to the circuit. The resistance of the RN50E20R0FB14 is 50 ohms and it will only allow a certain amount of electricity through it, depending on its power rating. The resistor works by absorbing the energy in the form of heat and dissipating it away from the circuit, thus limiting the amount of current in the system.

In conclusion, the RN50E20R0FB14 is a through hole resistor designed for use in a variety of applications, including temperature sensors, motor control, timer circuits, voltage regulators, and audio preamps. It is constructed with a thin-film, semi-conductor material and is encased in an epoxy coating for additional protection. The resistor works by reducing the flow of current that passes through it, thus limiting the amounts of electricity in the system. This makes the RN50E20R0FB14 an ideal choice for a range of applications due to its reliable and stable performance.

The specific data is subject to PDF, and the above content is for reference