RN50E30R1DBSL

Series:	Military, MIL-R-10509/8, RN50
Packaging:	Bulk
Part Status:	Active
Resistance:	30.1 Ohms
Tolerance:	±0.5%
Power (Watts):	0.05W, 1/20W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.065" Dia x 0.150" L (1.65mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through Hole Resistors come in many different types and shape, each having specific and unique properties tailored for various application fields and usage. The RN50E30R1DBSL, commonly referred to as a resistor, is a type of Through Hole Resistor commonly used for applications such as load balancing, sensing, and power management. This article will explain the RN50E30R1DBSL application field and working principle.

RN50E30R1DBSL – Applications and Uses

The RN50E30R1DBSL resistor has multiple applications and uses, with its most common use being for power management and load balancing. It is typically used to reduce the current draw on a circuit, as well as manage and balance the voltage on a circuit. The RN50E30R1DBSL is also used in sensing applications. Due to its unique properties, such as its low impedance, the RN50E30R1DBSL is typically used in infrared, or IR, sensors. These sensors allow efficient control of voltage and allow for higher resolution images and data acquisition from any infrared-enabled device. The RN50E30R1DBSL is also an ideal component for current sensing applications, as it has a low resistance and is able to accurately sense current levels in circuits.

RN50E30R1DBSL – Working Principle

The RN50E30R1DBSL is a typically two-terminal resistor and operates on a simple principle: Current is directly proportional to voltage in a series circuit. In a voltage divider circuit, current flows through the RN50E30R1DBSL and is divided among the rest of the resistors based on its resistance. This divides the current among all components of the circuit, thus creating the desired load balancing. In a current measurement circuit, the same principle applies, but the current is measured rather than balanced. The RN50E30R1DBSL has an efficient power rating, thanks to its low resistance value compared to other current-sensing components. This allows the RN50E30R1DBSL to handle higher voltages and currents, while still being able to accurately measure and control the current in the circuit.

Conclusion

Through Hole Resistors are essential components of most electronic circuitry, due to their ability to provide efficient and precise control over the current and voltage in a circuit. The RN50E30R1DBSL, in particular, is an ideal component for power management and load balancing applications, as well as current sensing applications. Its better efficiency rating and higher power handling capabilities allow the RN50E30R1DBSL to provide a reliable and accurate reading of the circuit\'s voltage and current levels. By understanding the application field and working principle of the RN50E30R1DBSL, one can gain a better understanding of how to use this component in their own circuit designs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description