RN55C1962BBSL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole Resistors

A through-hole resistor is an electronic component that is made up of a variety of electrical resistors. It is usually composed of two contact points, a ceramic sleeve and an internal wire. The contact points can either be a special purpose appliance, such as a terminal, or a socket into which a variety of components can be plugged in.

RN55C1962BBSL is widely used in the power supply system. Its entire structure is composed of two separate parts, the resistor and the metal body. It works on the principle of resistive heat exchange. The resistor generates an electric current when electric energy is passed through it. The metal body serves as an insulator, which allows the heat generated by the electric current to be dissipated away from the resistor.

In general, the RN55C1962BBSL applications span a wide range from power supplies and DC voltage regulators to signal processing, where the resistor is used as a feedback element in the measuring circuit. It can be used as a voltage divider to obtain a lower voltage output, and for heat control devices, such as heaters, thermoelectric coolers, and power dissipation circuits. It is also used for DC/DC converter for AC/DC and DC/DC inverter, motor control and drive circuits, and for power factor correction.

The installation of a through-hole resistor is relatively easy. The component should be connected according to the circuit specification for the given application. After the connection is made, the power can be delivered to the component’s terminals for proper operation. Connecting the resistor to its circuit is the same for most components, with the help of a few common tools. The resistor body is usually connected directly to the circuit board using screws, solder, or bearing clips. The other end of the resistor is wired using metal nut inserts or soldered onto the other component lead.

The important factors to consider when selecting a through-hole resistor are its power rating, size, and tolerance. The power rating should be rated higher than the power expected from the circuit. This ensures that the resistor does not overheat during its normal operation. The size of the resistor can vary depending on the application. The most common sizes are 1206, 1210, and 2520. The tolerance of the resistor should be chosen according to the application’s requirements.

In conclusion, the RN55C1962BBSL resistor is a versatile electronic component that serves a variety of purposes. Its main purpose is to resist the flow of an electric current. Its various applications span a vast range from DC/DC converters and DC voltage regulators to power supply systems. The installation of the component is relatively easy and requires a few common tools for proper connection. The important factors to consider when selecting a through-hole resistor are its power rating, size and tolerance.

The specific data is subject to PDF, and the above content is for reference