Series:	Military, MIL-R-10509/7, RN55
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	208 kOhms
Tolerance:	±0.1%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are one of the most widely used components in electronic devices, circuits, and systems. This type of resistor is often used for applications where the lead-based wire is routed through the substrate, usually a printed circuit board (PCB). For example, RN55E2083BR36 is a carbon film through-hole resistor. It is composed of a resistive element and two leads, which are formed at the end of the resistive element by soldering. Typically, the RN55E2083BR36 has a power rating of 0.5 watts and a tolerance rating of 10% ±2%. The through hole resistor is constructed for both high voltage and high current.The RN55E2083BR36 is a widely used component because it can accurately and reliably control the current and voltage flow between two points. The most common application fields of the RN55E2083BR36 include telecommunications, power supplies, consumer electronics, computer peripheral devices, security systems, medical equipment, automotive applications, and more.The working principle of the RN55E2083BR36 is fairly straightforward. It works like any other resistor, by limiting the flow of current through a circuit. Every resistor, including the through-hole resistor, has a resistance that is measured in ohms. The resistance determines the amount of current that passes through the circuit. When the voltage across the resistor is higher than the resistor\'s rating, then the power dissipates through the resistor. This will cause the resistor to get hot and can cause damage to the circuit. The current then passing through the resistor can be limited by adjusting the resistance of the resistor. This can be done by either changing the resistor itself or by adding additional resistors in series with it.Finally, the through-hole resistor is typically built to withstand environmental conditions such as extreme temperatures, humidity, and vibration. These resistors are extremely reliable and can tolerate a wide range of current and voltage levels. Thus, they are very useful in many different application fields.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description