RN55E2772BRE6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electrical components which are used to resist electrical current and/or to measure the voltage differential between two points of a circuit. The RN55E2772BRE6 through hole resistor is an example of such a resistor.

The RN55E2772BRE6 is a double sided, through hole resistor that is available in leaded packages with both axial and radial lead lengths. It is designed to be used in a wide variety of applications including power management, communications, computing, industrial, automotive, and consumer electronics.

The RN55E2772BRE6 has a power rating of 3 W, a resistance range of 100 ohms to 10 kohms, and a tolerance of 5%. It also has a maximum voltage rating of 100 volts and a maximum temperature rating of 150°C. In addition, the RN55E2772BRE6 has an insulation resistance of 100MΩmin, an operating temperature range of -65°C to 150°C, and a coefficient of temperature of 25ppm/°C.

The working principle of the RN55E2772BRE6 is based on Ohm’s Law. According to Ohm’s Law, the resistance of a circuit is equal to the voltage across the circuit divided by the current flowing through the circuit. In other words, if the voltage and current are known, the resistance can be calculated. This is the same principle used in the RN55E2772BRE6. The resistance is fixed, meaning that the voltage drop across the resistor is constant, regardless of the amount of current flowing through the resistor. This allows the RN55E2772BRE6 to be used to provide a steady voltage drop and current flow throughout a circuit.

The RN55E2772BRE6 is also used in low voltage applications to measure voltage drops in a circuit. This is done by connecting a voltage meter to each side of the resistor. The voltage drop across the resistor can then be read from the voltage meter. This is useful when designing and troubleshooting electrical systems.

Finally, the RN55E2772BRE6 is used in high voltage applications to provide a regulated power source. By connecting the resistor across the input and output of the system, a steady voltage drop is maintained, allowing current to flow at a constant rate. This is useful when designing and troubleshooting high power systems, such as generators and transformers.

In summary, the RN55E2772BRE6 through hole resistor is an electrical component that is used in a variety of applications. It has a fixed resistance, allowing voltage drops to be maintained and current to flow at a constant rate. It is also used to measure voltage drops in low voltage applications and to provide a regulated power source in high voltage applications.

The specific data is subject to PDF, and the above content is for reference