RN60C2430FB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components that are commonly used in electrical engineering circuits. In electronic circuits, resistors are used to regulate the voltage and current. The RN60C2430FB14 is a through-hole resistor from the Bourns Electronics Group that is specifically designed for automotive applications. It is a special type of resistor known as a Zener resistor, which has a reverse voltage for use in the protection and control of various components. This article will discuss the application field and working principle of the RN60C2430FB14.

The RN60C2430FB14 is mainly used in automotive electronics where it is often employed for voltage clamping and protection of electronic components from overvoltage conditions. It is also used in circuits as a voltage reference to provide a stable voltage level for analog circuits, and in surge protection circuits to absorb high voltage spikes. Other applications include stabilizing output voltage level, bypassing high-voltage signals, and as low-power circuitry.

The RN60C2430FB14 is a through-hole resistor with a reverse voltage of 24V and a forward voltage of 30V. It has a maximum power rating of 0.6 watts and a resistance range of 1.0 ohms to 1K ohms. It is also RoHS compliant and complies with JESD-201 and 202 standards. The resistor is designed for automated assembly and is suitable for surface mounting with a two-piece fluxless solder process.

The RN60C2430FB14 works by providing a reverse voltage clamping action in the circuit when an overvoltage condition occurs. The resistor acts as a Zener diode, which allows a certain amount of current to pass through it in the reverse direction. This current is limited to the maximum power rating of the resistor, which is set at 0.6 watts. The current will then be absorbed by the resistor, limiting the voltage that reaches the rest of the circuit to the rated level.

In surge protection circuits, the RN60C2430FB14 is effective in absorbing high voltage spikes by passing current in the reverse direction. This current is limited to the maximum power rating of the device, allowing the excess voltage to be safely discharged without damaging other components. The resistor also acts as a voltage reference in analog circuits to provide a stable output voltage level.

The RN60C2430FB14 is a through-hole resistor designed for use in automotive electronics, as well as other applications. It has a reverse voltage of 24V and a forward voltage of 30V, and is capable of absorbing up to 0.6 watts of power. The resistor is effective in providing voltage clamping and protection, as well as in surge protection circuits for limiting the voltage reaching the rest of the circuit. It is also used in applications such as voltage reference and bypassing of high-voltage signals.

The specific data is subject to PDF, and the above content is for reference