RN60C4120FBSL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are an essential component in almost any electronic circuit. The use of the RN60C4120FBSL is becoming increasingly popular due to its small size and low power consumption. This resistor is a through hole device, meaning it is connected to the circuit via two contact pads. These pads are usually placed on each side of the chip, allowing for easy installation in PCBs.

The RN60C4120FBSL is a four-terminal resistor with a resistance of 120 Ohms. The four terminals are typically referred to as A, B, G and H. Terminal A and B are the two non-contiguous terminals. These are typically used as the two connection points for the resistor. Terminal G is the ground connection and the H terminal is an optional connection point.

The RN60C4120FBSL can be used in various applications. It is commonly used as a voltage divider, where two similar resistors are placed in series. This allows for a certain amount of current to pass through the two resistors, creating a voltage drop. The voltage drop can be useful for providing an adjustable voltage signal or regulating the voltage level in a circuit.

The RN60C4120FBSL is also useful for limiting current. When placed in series with an external circuitry, the four terminals of the resistor are used to control the level of current that passes through the other components. This is done by adjusting the resistance so that the desired amount of current is able to pass through. This is an effective way to protect other components in a circuit from overloading.

The RN60C4120FBSL is also ideal for use in audio electronics. When placed in between a speaker and amplifier, the resistor can be used to adjust the speaker’s sound level. The resistance of the resistor increases or decreases the level of current that flows to the speaker, allowing for the sound volume to be changed.

The RN60C4120FBSL is also a popular choice for use in power supplies. Its small size and low power consumption makes it well-suited for use in this application. The resistor can be used to control the amount of voltage output by the power supply. This is done by adjusting the resistance so that the desired voltage is output.

The RN60C4120FBSL is a four-terminal device with a resistance of 120 Ohms. Its small size, low power consumption and ease of installation make it both practical and cost-effective. It is commonly used in voltage dividers, current limiters, audio applications and power supplies. As a through-hole resistor, the RN60C4120FBSL can be easily installed on PCBs. This makes it a popular choice for many circuit boards.

The specific data is subject to PDF, and the above content is for reference