RN60E2551FRSL Resistors

Series:	Military, MIL-R-10509/1, RN60
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	2.55 kOhms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.145" Dia x 0.344" L (3.68mm x 8.74mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are components used in a wide range of applications. The RN60E2551FRSL is a common type of through hole resistor used in various applications. This article will discuss the application field and working principle of the RN60E2551FRSL resistor. The RN60E2551FRSL resistor is a two-terminal or single-terminal device that is used to limit or regulate the flow of electrical current in an electronic circuit. It functions by introducing resistance into a circuit, and the value of resistance is measured in ohms (Ω). This type of resistor is available in various resistance values and tolerances, and it is also known as a fixed resistor. The RN60E2551FRSL resistor is commonly used in applications such as voltage dividers, current-limiting circuits, and noise filters. In voltage dividers, two resistors are connected in series to a voltage source. The resistance of both resistors determines the voltage drop across each resistor, and the RN60E2551FRSL can be used for this application. It is also used in noise filter circuits, where it is used to reduce high-frequency noise signals in the circuit. Furthermore, it can be used in current-limiting circuits to limit the current flow in the circuit to a safe level. The working principles of the RN60E2551FRSL resistor are similar to other through-hole resistors. It is composed of three parts: a resistive material, a resistive element, and a body. The resistive material is usually a thin metal film or carbon-based material, and is used to limit the number of electrons that can flow through the circuit. The resistive element is a conducting material, such as copper or nickel, which is used to provide an electrical connection between the two terminals. Finally, the body is an insulating material that isolates the resistor from other components in the circuit. The resistive material and resistive element are connected in a spiral shape, which is the typical construction of a through-hole resistor.When electricity is applied to the two terminals of the resistor, electrons flow through the resistor in a spiral pattern. The number of electrons that can flow through the resistor depends on the resistance of the resistor, and the electrical current is limited by the resistance of the resistor. The electrical current passing through the resistor generates heat, which is dissipated by the resistor.In conclusion, the RN60E2551FRSL resistor is a common type of through-hole resistor that is used in various applications. It is composed of three parts: a resistive material, a resistive element, and a body. The resistive material limits the number of electrons that can flow through the resistor, while the resistive element provides electrical connection between the two terminals. The resistor is used in applications such as voltage dividers, current-limiting circuits, and noise filters, and it works by limiting the flow of electrons through the resistor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description