RN60E4422FBSL

Series:	Military, MIL-R-10509/1, RN60
Packaging:	Bulk
Part Status:	Active
Resistance:	44.2 kOhms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.145" Dia x 0.344" L (3.68mm x 8.74mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsA through hole resistor is an electronic component used in circuits to reduce the flow of electric current, resist changes in signal levels, and adjust circuit loading. In general, they provide protection to other components that may be damaged from overloading. The RN60E4422FBSL is one of many different types of through hole resistors available on the market today.The RN60E4422FBSL is a linear, 4.22kΩ, surface mount resistor. It is a small, low profile device measuring 0.60” x 0.45” and has a tolerance of ± 5%. Due to its small size and low profile, it is ideally suited for shallow profile circuit boards in telecom, instrumentation, events, medical devices, home appliances, automotive, and consumer electronic equipment.In terms of its electrical characteristics, this resistor has low power consumption and high stability. It features a maximum power dissipation of 350mW, a maximum voltage of 35V, and an operating temperature range of -55°C to +125°C. Additionally, the capacitance between the conductor and element is less than 1 pF.The RN60E4422FBSL resistor features a four-pin construction and a through-hole design, making it easy to install in a circuit board. It also has gold wire bonds, which provide excellent electrical connectivity and mechanical stability. Furthermore, the resistor is rated AEC-Q200 qualified for use in automotive applications.The working principle of the RN60E4422FBSL resistor is based on Ohm’s Law. When a voltage is applied across the resistor, it causes electrical current to flow through the device and is slowed down by the resistance of the resistor itself. This resistance is measured in ohms, which is a unit of electrical measurement used to define the magnitude of the current that will be allowed to pass through the component. As the voltage applied to the resistor increases, the amount of current that the resistor can pass increases proportionally.The RN60E4422FBSL resistor is an excellent choice for applications where a low profile, small size, and high tolerance are needed. Its low power consumption, high stability, and AEC-Q200 qualification make it ideal for automotive and other demanding applications. Thanks to its through-hole design, the RN60E4422FBSL resistor can easily be installed into a circuit board and provide reliable electrical contact and stability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description