RN60E6810BRE6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electrical components with varying resistance values. The RN60E6810BRE6 is one type of Through Hole Resistor, and it has a resistance value of 6.81kOhm. It is commonly used in circuit designs where a resistance value is needed in the range of 4.7kOhm to 6.8kOhm.

The RN60E6810BRE6 is a surface mount device that consists of an inner layer containing a resistive material, the resistor itself, and an outer layer of insulating material. The outer insulator is typically made of glass, ceramic or glass-ceramic. The resistor component is usually a carbon or metal film type. The resistance value of the resistor is determined by the amount of its resistive material. The resistor is usually attached to a printed circuit board (PCB) through an array of pins, with the resistance value soldered into place.

The RN60E6810BRE6 is a general purpose rectifier, meaning it is not intended for use in any specific application. It is designed to provide a consistent and stable resistance value when current is applied to it. The RN60E6810BRE6 has a resistance tolerance of 5% and a maximum operating temperature of +105°C.

The RN60E6810BRE6 application field includes various types of electrical circuit designs. It can be used in power supplies, voltage regulators, signal conditioning circuits and waveform generating circuits as a voltage divider or current limiting device. It is also used in circuits for noise reduction, and can be connected as a resistor that regulates the speed of motor drives, in order to adjust the speed of the motors.

The working principle of the RN60E6810BRE6 is fairly straightforward. As current is applied to the resistor, the voltage across it remains constant, and the current is limited to the maximum current rating of the resistor. This is due to the ohm’s law, which states that resistance is voltage divided by current. For example, if the voltage across the RN60E6810BRE6 is 12V and the current is 1 Ampere, the resistor will have a resistance of 12 Ohms. This is because 1 Ampere of current will be opposed by 12 Volts of voltage.

The RN60E6810BRE6 has a variety of applications and is often used in circuit designs for power supplies, voltage regulators, signal conditioning circuits, waveforms, motor drives and noise reduction. It provides a consistent and stable resistance value when current is applied to it, and is capable of withstanding high temperatures and high shock loads. The RN60E6810BRE6 is an important part of any circuit design where a consistent and reliable resistance value is required.

The specific data is subject to PDF, and the above content is for reference