RN65D1743FB14

Series:	Military, MIL-R-10509/2, RN65
Packaging:	Bulk
Part Status:	Active
Resistance:	174 kOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.180" Dia x 0.562" L (4.57mm x 14.27mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through hole resistors, in particular RN65D1743FB14, is a type of electrical component used to regulate electrical currents in a variety of applications. The resistor is considered a passive two-terminal component and, therefore, has no polarity, meaning it can be used in any orientation. Through hole resistors are made up of a cylindrical body with a high-value ceramic core substrate and a metal end-cap.

RN65D1743FB14 Application Field

RN65D1743FB14, a specific model of through hole resistors, can be used in a wide variety of applications, due to its wide resistance range and relatively low cost. It is typically used for voltage and current regulation, filtering, stabilization, signal isolation, and noise reduction.The RN65D1743FB14 is especially suited for automotive applications, due to its wide resistance range and long life span. It is also used in medical equipment, telecommunication devices, consumer electronics, and circuit protection applications.

Working Principle

The resistor works on the principle of resistor-capacitor (RC) circuit theory. As the name implies, a resistor-capacitor circuit is a combination of a resistor and capacitor.In a resistor-capacitor circuit, the resistor is used to reduce the current and the capacitor is used to store energy. When a current passes through the resistor, the resistor\'s resistance steadily reduces the current flowing through the circuit, and the capacitor helps maintain the current level.The voltage and current in a resistor-capacitor circuit can be regulated by adjusting the resistance value of the resistor. This is done by changing the value of the resistor. In the case of the RN65D1743FB14, the resistance can be adjusted by changing the physical size of the resistor, as well as the type and amount of material used.

Conclusion

In conclusion, the RN65D1743FB14 is a type of through hole resistor with wide application range and long life span. The resistor works on the principle of resistor-capacitor (RC) circuit theory. It can be used in a variety of automotive as well as medical, telecommunication, consumer electronic, and circuit protection applications. By adjusting the resistor size, material, and resistance, the current and voltage levels in an RC circuit can be regulated.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description