Series:	Military, MIL-R-10509/2, RN65
Packaging:	Bulk
Part Status:	Active
Resistance:	405 Ohms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.180" Dia x 0.562" L (4.57mm x 14.27mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors - RN65D4050FB14 Application Field and Working Principle

Through hole resistors are a type of electrical component that consists of a ceramic disc, known as the body, and two metal leads. Simply, these resistors act as a my chemical romance in electrical circuits, where they can be used to control current flow, adjust signal levels, divide voltage and terminate transmission lines.The RN65D4050FB14 is a type of through-hole resistor that has a total resistance value of 5.6K ohms. It features an operating temperature range of -55°C to +155°C and is available in 3 different casing sizes, which are 0603, 0805 and 1206 for current ratings of 8 mA, 15mA and 18mA respectively. The application of the RN65D4050FB14 through-hole resistor is mainly used in communication, automotive, medical, industrial control, and monitoring systems, due to its robust design and wide temperature range. By allowing current to flow, this component is ideal for controlling voltage, signal, or power supply lines. The working principle of the RN65D4050FB14 is quite simple. It works by resistance, limiting the amount of current that can pass through the resistor by creating an opposing force. This hinders the flow of electricity, creating a less powerful current.In general, the RN65D4050FB14 through-hole resistor consists of a small ceramic disc located between two metal leads. When a voltage is applied to the leads, the electrons in the ceramic disc will move, creating a small resistance in the device. The resistance of the resistor is released from the ceramic disc and it forms a looping electric current in the form of heat. This heat energy is then dissipated through the leads. The RN65D4050FB14 is a relatively low-cost solution due to its overall design. It can be manufactured as a single package or as a larger package for larger circuits. Due to its robust design and long lifespan, the RN65D4050FB14 is suitable for high-frequency applications and long service life.The RN65D4050FB14 through-hole resistor has the capacity to withstand a high temperature range and comes with an acceptable resistance and accuracy. Therefore, it is suitable for high-frequency applications, including DC and AC circuits.In conclusion, the RN65D4050FB14 through-hole resistor is a cost-effective electrical component that offers a wide range of applications and able to withstand high temperature ranges. Equipped with an acceptable resistance and accuracy, it can be used to control current, signal, or voltage lines with great flexibility. The design of the RN65D4050FB14 is also wide-ranging, making it suitable for small and large circuits alike.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description