RN65E2701FB14

Series:	Military, MIL-R-10509/2, RN65
Packaging:	Bulk
Part Status:	Active
Resistance:	2.7 kOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.180" Dia x 0.562" L (4.57mm x 14.27mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of resistor with leads extended at both ends of the casing to allow it to be fixed into a terminal board. The RN65E2701FB14 is an example of a through hole resistor that can be used in many applications and has its own working principle of operation. This guide will discuss the applications, principles of operation, and the importance of choosing the right through hole resistor for any application.

Applications of the RN65E2701FB14

The RN65E2701FB14 through hole resistor can be used in several applications, from power supplies to audio amplifiers. It is primarily used in high-current circuits, due to its ability to handle up to 5 Amps of continuous current. It is also highly resistant to shock and vibration, making it suitable for use in rugged environments.In addition to its uses in electronics and electrical engineering, the RN65E2701FB14 can also be used as a resistor for safety systems. It is suitable for use in automotive systems, as it has a working temperature range of -40 to 90°C and a tolerance of ±20%.

Working Principle of the RN65E2701FB14

The working principle behind the RN65E2701FB14 is based on Ohm’s law. According to this law, the voltage across a resistor is proportional to the current that flows through it. The resistor can therefore be used to control the amount of current that flows through a circuit, by limiting the flow of electrons.In addition, the RN65E2701FB14 also acts as a dissipater of heat. While the current flowing through a resistor causes a voltage drop across it, the electron activity also generates heat. This heat can be dissipated through the resistor’s casing, and some types of resistors are designed with features such as heat sinks to help them dissipate the heat more efficiently.

Importance of Choosing the Right Through Hole Resistor

When choosing a through hole resistor for any application, it is important to consider the application’s requirements and the resistor’s capabilities. A good choice of resistor can make the difference between a successful project and a costly failure.It is also important to take into account the other components used in the circuit. If, for example, the circuit requires high-frequency signals, then a chip resistor may be more suitable than a through hole resistor. The chip resistor would be better able to handle higher frequencies, while a through hole resistor’s leads may act as an inductor and generate additional noise.

Conclusion

The RN65E2701FB14 through hole resistor is a versatile and reliable component which can be used for a variety of applications. With its extended leads, it can be easily mounted on a terminal board and replaced if needed. Its working principles are based on Ohm’s law and it is useful for controlling the current flow in a circuit and dissipating heat. When selecting a through hole resistor for any application, it is important to consider the application’s requirements and the resistor’s capabilities, as the wrong choice can result in a costly failure.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description