RN70D7501FRSL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A resistor is an electrical component used to reduce, limit or regulate current flow. It typically takes the form of a electronically conductive piece of material between two electrical terminals. The resistance value of a resistor is determined mainly by its physical size and composition. Resistor components can be divided into two broad categories; through-hole and surface mount resistors. In this article, we\'ll discuss the application field and working principle of the through-hole resistor RN70D7501FRSL.

Through-hole resistors are components that are soldered onto a board through a hole in the component itself. These types of resistors are typically used in applications where higher precision is desired. In contrast, surface mount resistors are soldered onto the surface of the printed circuit board and are generally used in high volume applications. Through-hole resistors are closely related to variable resistors, which have a variable resistance that can be adjusted via a knob or set by attaching a wire to a terminal.

RN70D7501FRSL is a through-hole resistor with a precision tolerance of 0.5%. It is a small precision resistor with a power capacity up to 0.15W/ 165°C. It features a radial leaded body for efficient board assemblies. Its construction is encapsulated in a flame retardant resin, providing additional protection. With a wide resistance range of 250 ohms to 5M ohms, the RN70D7501FRSL is suitable for various applications.

One of the most common applications of the RN70D7501FRSL is as an electronic current limiter. In this role, it limits current flow in an electrical system, protecting other components from damage due to overcurrent. This helps to ensure stable operation of the protected circuits. The resistance of the RN70D7501FRSL also allows it to act as a voltage or current divider.

To understand how a resistor works, it\'s important to look at its basic components. Resistors are made up of two terminal connections and a resistive layer. When current flows through a resistor, it causes electrons to collide with atoms and create resistance. This resistance changes the amount and direction of current flow. The amount of resistance a resistor provides is known as its ohm value.

The ohm value of the RN70D7501FRSL can be adjusted by changing its physical size and construction. The resistor\'s ohm value is determined by its length, width, and height, so adjusting these three values will change its resistance value. In addition, different surface mount materials will also influence the resistance value.

Another important factor to consider when selecting a through-hole resistor for an application is its temperature coefficient. This is the amount by which a resistor\'s resistance changes for every change in temperature. The RN70D7501FRSL has a temperature coefficient of 250 ppm/°C, which means that its resistance value will change by 0.25% for every 1°C change in temperature.

The RN70D7501FRSL can be used in a number of different applications, including power distribution, signal processing, and audio applications, as well as other circuits requiring precise, stable, and reliable resistors. Its high precision tolerance makes it ideal for precision circuits, and its encapsulation prevents stray signals, meaning that it can be used in sensitive applications as well.

In conclusion, the RN70D7501FRSL is a through-hole resistor that is suitable for various applications, including precision circuits, power distribution, and signal processing. Its small size, high precision tolerance, and encapsulated body make it very reliable in sensitive applications. By adjusting its physical size and construction, the resistance value of this resistor can be adjusted to suit the application.

The specific data is subject to PDF, and the above content is for reference