RNC50H1002BSRE6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are a well-known and commonly used type of resistor. In the electronics industry, they are the most popular type of resistor. A through hole resistor is an electronic component that is mounted on a circuit board and uses a hole to receive a wire conductor. The term "through hole resistor" is most commonly used in reference to the style of resistors that have metal-coated leads that extend through the mounting hole and are soldered to the printed circuit board. The RNC50H1002BSRE6 is an example of a through hole resistor.

The RNC50H1002BSRE6 is a surface-mount through hole resistor which is designed for medium-power applications. This device is made up of a length of base material with a zinc oxide layer located between two C-rings. It has a resistance tolerance of ±2%, a temperature coefficient of ±150ppm/ °C, and a maximum power rating of 50 watts. The resistor has a recommended operating temperature of 25°C-85°C, with a maximum operating temperature recommended at 105°C. The maximum voltage rating is 400V.

The RNC50H1002BSRE6 can be used in a variety of applications, including telecommunications equipment, consumer electronics, computers, and other electronic systems. This device is often used when high accuracy and stability are required. The device can also handle higher voltage and temperature levels than other types of resistors.

The working principle of the RNC50H1002BSRE6 through hole resistor is based on Ohm’s law, which states that the current that passes through a conductor is equal to the voltage divided by the resistance. Since this device is made from a length of electricity-resistant base material, with a zinc oxide layer in between two C-rings, the resistance of this device can be calculated by the length and diameter of the base material multiplied by the resistivity of the zinc oxide layer. The resistance of this resistor can then be adjusted by increasing or decreasing the resistance of the base material.

In conclusion, the RNC50H1002BSRE6 is a type of through hole resistor that is designed for medium-power applications. The resistance of this resistor is determined by the length and diameter of the base material and the resistivity of the zinc oxide layer. This device offers high accuracy and stability, and can handle higher voltage and temperature levels than other types of resistors. This device is often used in a variety of applications in telecommunications, consumer electronics, computers and other electronic systems.

The specific data is subject to PDF, and the above content is for reference