RNC50H1241FSR36

Series:	Military, MIL-PRF-55182/07, RNC50
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	1.24 kOhms
Tolerance:	±1%
Power (Watts):	0.1W, 1/10W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are available in one of two types: axial and radial. The axial type consists of two leads extending from opposite ends of a cylindrical body which houses the resistance element. The radial type, however, has two leads extending from the sides of a rectangular body. Both types are connected to a circuit board with the leads inserted into the board’s corresponding through-hole plating. The RNC50H1241FSR36 is a popular through hole resistor. It is widely used in commercial lighting applications and provides a nominal resistance of 50 ohms while operating at 12V. The FSR36 resistor is constructed with two stainless steel plates, separated by a ceramic insulator inside of a 12mm by 6mm body. The FSR36 can tolerate temperatures of up to 125°C and is rated for 10W of dissipation.The Working principle of a resistor is simple. It is essentially an electronic device that reduces the current flow in a circuit. An electric current consists of electrons flowing through a conducting material such as a metal wire. The current flowing through a resistor will be reduced depending on the amount of resistance it offers. This is because the resistor will resist the flow of electrons due to its physical characteristics.In the case of the RNC50H1241FSR36, the resistor’s resistance allows it to reduce the flow of current in a circuit, by limiting the current. This is known as Ohm’s Law, which is a fundamental law of physics and states that the current flowing through a resistor will be inversely proportional to its resistance. Therefore, the higher the resistance of the resistor, the less current will flow through it. The FSR36’s 50 ohm resistance is enough to reduce the current in a circuit to a specified amount, without hindering the functioning of the circuit.The RNC50H1241FSR36 has numerous applications in commercial lighting, amplifier circuits, tank level indicators, and power converters. In commercial lighting applications, the FSR36 can be used to control the intensity of the light and help reduce glare from street lights. The FSR36 is also used in amplifier circuits to absorb any excess current that may flow through the circuit. This helps to prevent any potential damage to the amplifier’s components. The FSR36 can also be used in tank level indicators to adjust the frequency of the signal sent to the indicator. This helps ensure accurate readings. Lastly, the FSR36 is used in power converters to control the amount of power supplied to the converter thus preventing any potential damage. The RNC50H1241FSR36 is a very common through hole resistor, used in various applications. Its low resistance, high temperature tolerance and 10W power rating make it an ideal choice for commercial lighting, amplifier circuits, tank level indicators and power converters. Its construction and working principle make it an effective way to reduce the current in a circuit to a desired level, without hindering the circuit’s function.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description