RNC50H1371DSBSL

Series:	Military, MIL-PRF-55182/07, RNC50
Packaging:	Bulk
Part Status:	Active
Resistance:	1.37 kOhms
Tolerance:	±0.5%
Power (Watts):	0.1W, 1/10W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, or THRs, are one of the most common types of resistors used in electrical and electronic circuits. In their simplest form, through-hole resistors consist of an insulating material, like plastic, with copper bands embedded on the surface. The copper bands are electrically connected to each other at either side of the resistor and at one or more points between the sides of the resistor. The resistance of the resistor is determined by the number of copper bands and their distance apart.The RNC50H1371DSBSL is one of the more common types of through-hole resistors. It is used in a wide variety of applications and is regularly used in radio, television, and audio systems for power control, signal adjustment, and protection. It is also used for circuit design in automotive, computer, industrial, and telecommunications applications.The RNC50H1371DSBSL is a high-power resistor with a maximum power dissipation of 8 watts. It features a flat profile design, which is ideal for applications that require a low profile design. The RNC50H1371DSBSL has a resistance rating of up to 1K ohms. The resistor can operate at temperatures ranging from - 55°C to +125°C. When it comes to the working principle of the RNC50H1371DSBSL, its resistance is determined by the number of copper bands and their distance apart. The copper bands are electrically connected to each other at either side of the resistor and at one or more points between the sides of the resistor. The distance between the connections, known as the spacing, determines the size of the resistor. When a voltage is applied across the resistor, electrons will flow through the device. The insulated wire connected to each side of the resistor carries this electric current. The resistance of the resistor determines the amount of current that will flow through it, based on Ohm’s law. The RNC50H1371DSBSL also features a low voltage breakdown point which provides a measure of the maximum voltage that can be safely applied to the device without causing damage. In addition to its wide range of applications, the RNC50H1371DSBSL is also renowned for its sturdy construction and durable performance. It is constructed using a metal oxide film, which is designed to withstand harsh environmental conditions and increase its lifetime. The resistor also features a variety of surface mount packages, making it ideally suited to those applications requiring a high level of reliability and cost savings. The RNC50H1371DSBSL is a versatile through-hole resistor that can be used in a variety of applications. Its wide range of resistance ratings, combined with its low voltage breakdown point, make it ideal for high power and computer, telecom, and automotive applications. The resistor is built to last and its construction ensures that it will remain reliable even in the harshest of conditions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description