RNC50H1373FSB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are those resistors that have a body with cylindrical shape of a specific length and diameter. They are often of the wirewound type and have long leads on either end for mounting or securing them to a substrate. The RNC50H1373FSB14 is a through-hole resistor of this type. It is a 50 ohm resistor with a tolerance of 1%. It has a temperature coefficient of 1000ppm/C and a dielectric strength of 500V/μsec. The package size is 13.0mm x 7.3mm with a 3.50mm Mounting hole diameter. It is RoHS compliant, and designed to operate in both high-temperature and low-temperature environments.

The most important application of through-hole resistors is to increase or decrease the current flow in a circuit. They can also be used as high voltage resistors to limit the voltage passing through a component, such as a capacitor. This helps to protect the component from damage and helps to prevent any electrical hazards. The RNC50H1373FSB14 is especially suited for these applications due to its high-voltage rating and tolerance. It is also highly efficient, and provides reliable and stable performance in extreme temperatures, furthering its suitability for high-voltage and high-temperature applications.

The working principle of the RNC50H1373FSB14 through hole resistor is based on Ohm\'s law which states that the current passing through the component is directly proportional to the voltage applied across it. Thus, when a voltage is applied to the resistor, it will convert the electrical energy into heat energy, thereby limiting the current. The amount of power that the resistor dissipates is determined by the amount of current and voltage that is applied to them. As the size of the resistor increases so does the power dissipation capacity of it. This makes the RNC50H1373FSB14 resistor ideal for applications in which a high amount of power needs to be dissipated.

In addition to increasing or decreasing the current passing through the circuit, through-hole resistors can also be used to create damping or gain in an amplifier circuit. This is possible due to the ability of the resistor to absorb the energy from a signal, thereby creating a dampening effect. Similarly, when resistance is added in parallel with the gain stages in an amplifier, it can increase the gain in the signal, allowing for a stronger output. The RNC50H1373FSB14 through-hole resistor has been specifically designed to do this in a reliable manner.

Finally, through-hole resistors can also be used in combination with other components to form functional circuits. For example, when two of these resistors are placed in parallel, the combined value of the two resistors will be much lower than the value of either of them individually. This is a useful technique for forming adjustable dividers and providing attenuation, and the RNC50H1373FSB14 is well-suited for these applications as well.

In conclusion, the RNC50H1373FSB14 through hole resistors have many applications in the field of electronics. They are used to increase or decrease current flow in a circuit, to increase or reduce damping, and to form adjustable dividers and provide attenuation. In addition, they have been designed to operate in both low and high temperatures, making them suitable for a variety of applications. With these capabilities, the RNC50H1373FSB14 through hole resistors are perfect for a wide range of electronic applications.

The specific data is subject to PDF, and the above content is for reference