RNC50H1422DSBSL

Series:	Military, MIL-PRF-55182/07, RNC50
Packaging:	Bulk
Part Status:	Active
Resistance:	14.2 kOhms
Tolerance:	±0.5%
Power (Watts):	0.1W, 1/10W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<h1>Through Hole Resistors: RNC50H1422DSBSL Application Field and Working Principle</h1><p> Through-hole resistors, also known as leaded resistors, are resistors that are wired such that their leads are passed through holes in a PCB or other piece of electronic equipment and soldered on the other side. The RNC50H1422DSBSL is one such through-hole resistor, and its application field and working principle can be summarized as follows.</p><h2>Application Field</h2><p>Through-hole resistors like the RNC50H1422DSBSL, due to their robustness, are ideally suited to applications that require a high current or a relatively high power to be dissipated. A few examples of such applications include voltage regulation, noise reduction, current limiters, and motor control.</p><p>High reliability applications, such as medical equipment or aircraft systems, also employ through-hole resistors. Due to their relatively low cost and superior versatility, however, they are most commonly employed in general consumer electronic devices.</p><h2>Working Principle</h2><p>A through-hole resistor functions in much the same way as any other resistor. It is designed to lower voltage and/or limit current by reducing the flow of electrons in a electrical circuit. Put another way, the resistor’s job is to basically provide resistance to the flow of electricity.</p><p>The RNC50H1422DSBSL is a wirewound resistor, as is typical with through-hole devices, with a resistance range of 0.5 to 100 ohms and rated power of 500 mW. Its construction uses a helical coil of various chemicals, usually a manganese-nickel alloy, that are wound on an insulating ceramic core.</p><p>The most important feature of the RNC50H1422DSBSL is its ability to dissipate heat. Heat dissipation is an important consideration when selecting resistance components, since excess heat can reduce the lifespan of the resistor. As a result, through-hole resistors like the RNC50H1422DSBSL are most suitable for applications which require a relatively high power dissipation.</p><h2>Conclusion</h2><p>Through-hole resistors, like the RNC50H1422DSBSL, are designed to provide resistance to the flow of electricity. Their robust construction and reliability make them an ideal choice for applications that require high current or high power, such as motor control and voltage regulation. Furthermore, the RNC50H1422DSBSL is designed for heat dissipation and is therefore well suited for applications where excess heat is a concern.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description