RNC50H1780FSB14

Series:	Military, MIL-PRF-55182/07, RNC50
Packaging:	Bulk
Part Status:	Active
Resistance:	178 Ohms
Tolerance:	±1%
Power (Watts):	0.1W, 1/10W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors, also known as axial resistors, consist of two ceramic cylinders with metal end caps. The end caps are then filled with a conducting material that the energy flowing through the resistor must pass through. This creates a resistance to the current reducing its strength. Through hole resistors are widely used in electronics design as a reliable, and cost effective method to control current flows. This type of resistor is typically used in consumer electronics, industrial control systems, telecommunications, automotive, aviation and military applications. RNC50H1780FSB14 is a through hole resistor made by Teccor Electronics. This particular resistor is designed for both surface mount and through hole mounting. The resistor offers a choice of two different resistance values, allowing users to select the best device for their particular application. The working principle of RNC50H1780FSB14 is similar to other through hole resistors. When an electrical current is passed through this resistor, a level of voltage drop is created within the device. The voltage drop indicates the resistor’s resistance to the current. Depending on the size and type of resistor, the voltage drop and current flow can vary. RNC50H1780FSB14 is primarily designed for use in power supplies and subsequent power protection application fields. This particular type of through hole resistor from Teccor is designed to dissipate heat quickly and reduce overall risk of overheating during use. It can also be used in areas that have tight space constraints as it takes up very little physical space in comparison to other resistors. RNC50H1780FSB14 is a high power resistor that is designed for high current applications. It has a low failure rate in addition to offering a wide temperature range for successful operation. Its construction consists of a metalized film and an electrolyte gel. The metal layer provides a secure conduction path of electrical current and the electrolyte gel acts as an insulation layer. This design ensures a greater tolerance to extremes of temperature, humidity and vibration. RNC50H1780FSB14 through hole resistors can also be found in electronic devices and equipment used in consumer products. This includes audio and video packages, mobile phones and computer systems, where their high power capabilities enable them to provide a safe and reliable resistance between connections. These resistors can also be useful in motor control, automotive, and microwave applications. In conclusion, RNC50H1780FSB14 through hole resistors are reliable, robust and cost effective alternatives to standard resistors. They are primarily designed for power supply and power protection applications which require resistance to difficult conditions. They are also found in a variety of consumer electronics and products for their capability for high power, secure conduction and increased temperature tolerance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description