RNC50H1781FSRE6

Series:	Military, MIL-PRF-55182/07, RNC50
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	1.78 kOhms
Tolerance:	±1%
Power (Watts):	0.1W, 1/10W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

In the electrical and electronic industry, through-hole resistors are resistors that are fitted into holes in circuit boards, hardware, and other electronic components. The holes are typically drilled into the board itself, or pre-fabricated onto specialized metal and plastic components. The resistor is then inserted into the hole, making contact with the circuit board. These types of resistors are widely used to control the amount of current flowing through circuits and for other purposes.The RNC50H1781FSRE6 is a through-hole resistor component and one of the most commonly used resistors on the market. It is a radial-style resistor with a diameter of 0.22 inches and a length of 0.16 inches. This size allows the component to fit into most standard through-hole boards and components.The RNC50H1781FSRE6 works in a simple manner. It has two terminals and looks like a legless cylinder with two prongs sticking out. The two prongs are attached to the two terminals of the resistor. When current is sent through the resistor, the resistor will start to resist the current, creating resistance. The current will then flow through the resistor at a reduced level.The RNC50H1781FSRE6 is often used in various applications, such as signal conditioning, power dissipation, filtering, and noise reduction. It is also used in audio applications, such as audio amplifier circuits and loudspeaker crossover networks, or in industrial and automotive electronics.In applications where the resistor is used to reduce the current in a circuit, a low ohm value is often used. The resistance level is determined by the number of ohms which is described on the of the resistor. A higher ohm value will give more resistance meaning that less current will be able to flow through the resistor. A lower ohm value will provide less resistance meaning more current will be able to flow through the resistor.The RNC50H1781FSRE6 is a versatile component and can also be used in conjunction with other components to design a full circuit. For example, it can be combined with a capacitor to create a simple RC filter, which can be used to filter signals and reduce noise.Overall, the RNC50H1781FSRE6 is a through-hole resistor and one of the most widely used components in the electrical and electronic industry. It has a simple design which allows it to be used in many applications and is versatile enough to be used in combination with other components to create full circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description