RNC50H8162BSB14

Series:	Military, MIL-PRF-55182/07, RNC50
Packaging:	Bulk
Part Status:	Active
Resistance:	81.6 kOhms
Tolerance:	±0.1%
Power (Watts):	0.1W, 1/10W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

A through hole resistor is a type of electrical resistor that is mounted on a printed circuit board (PCB), hence the reference term “through-hole". Through-hole components are typically electrically and mechanically coupled to the PCB with the use of a soldered connection. Through hole resistors are designed to handle higher voltage and higher power applications than its surface mount counterpart. The RNC50H8162BSB14 is a type of through hole resistor from the RNC50 Series manufactured by Yageo Corporation. This resistor is able to handle up to 1W of power while occupying a small physical footprint. It can work in temperatures ranging from -55C to 155C with a voltage rating of 200V and a tolerance of that is rated to ±5%.

RNC50H8162BSB14 Application

The RNC50H8162BSB14 is designed for a variety of low-power applications such as current limiting, voltage division, and decoupling. It can also be used in high-frequency radio frequency (RF) applications where high power and excessive current is required. Depending on the application, this resistor can also be used in the amplifier circuits of amplifiers and power amplifiers. In some cases, the RNC50H8162BSB14 may be used as resistance mixing elements for signal mixing. It can also be used in automatic gain control (AGC) loops and active filters in RF and radio circuitry.The RNC50H8162BSB14 is widely used in audio circuits and audio signal applications. It can be used in amplification or filtering work in high end audio equipment and can be used to create powerful sounds. It can also be used in PA systems and switchboards for improved audio quality.

RNC50H8162BSB14 Working Principle

The working principle of the RNC50H8162BSB14 is based on the Ohm’s Law, which states that the current that flows through a resistor is proportional to the voltage applied across the resistor and inversely proportional to the resistance value of the resistor.The current flow through the resistor is limited by the amount of voltage applied to the resistor. This means that when the voltage applied across the resistor increases, the current flowing through it also increases. The resistor also works as a voltage divider in a circuit. When two resistors are connected in series, the voltage is divided between the two resistors according to the ratios of their resistances. The RNC50H8162BSB14 is also temperature stable. This means that its resistance value does not change significantly with temperature variations, making it ideal for high temperature working conditions. It also offers a good thermal stability due to its low self-heating.

Conclusion

The RNC50H8162BSB14 is a type of through-hole resistor from the RNC50 series manufactured by Yageo Corporation. It is able to handle up to 1W of power while occupying a small physical footprint. The RNC50H8162BSB14 can work in temperatures ranging from -55°C to 155°C with a voltage rating of 200V and a tolerance of ±5%. This resistor is designed for a variety of low-power applications such as current limiting, voltage division, decoupling, signal mixing, and AGC loops and active filters. The RNC50H8162BSB14 is also temperature stable and offers good thermal stability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description