RNC50H8661BSB14

Series:	Military, MIL-PRF-55182/07, RNC50
Packaging:	Bulk
Part Status:	Active
Resistance:	8.66 kOhms
Tolerance:	±0.1%
Power (Watts):	0.1W, 1/10W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RNC50H8661BSB14 Through Hole Resistors

Through Hole Resistors are one of the most common and basic components used in electrical systems. They are used to provide a resistor\'s electrical resistance and are available in a wide variety of shapes, sizes, and ohmic values. One of the most popular among them is the RNC50H8661BSB14 resistor, a 50 mOhm, 8,661B, 14 W Through Hole Resistor with a surface mount device (SMD) package.The RNC50H8661BSB14 Through Hole Resistor is primarily used as a current-limiting resistor or for limiting the amount of current flowing through a circuit. The resistor limits the current flow by dissipating energy as heat, which is known as "power dissipation." This means that the resistor will support a certain maximum value of current and drop the voltage within the circuit. The RNC50H8661BSB14 Through Hole Resistor operates by using the Ohm’s law, which states that the resistance of a resistor is equal to the ratio of voltage over current in a circuit. Its Ohmic value is the resistance of the resistor, measured in "ohms" (om) units. Increasing the voltage across the resistor will increase the amount of current that flows through it. The core electrical properties of the RNC50H8661BSB14 Resistor make it ideal for applications such as electronic ballasts, voltage-regulating circuits, linear dimmers, and LED lights. The size of the RNC50H8661BSB14 Through Hole Resistor is very important, as it will need to be able to fit inside the circuit board and provide the necessary resistance value. The RNC50H8661BSB14 comes in a 9mm by 6mm SMD package, making it an ideal size for fitting onto a circuit board. It also comes with a built-in thermal resistance, which can help prevent the resistor from overheating. This is important because overheating can lead to major issues with the electronics. The RNC50H8661BSB14 Through Hole Resistor is designed to be used with direct current powered circuits and cannot be used with alternating current powered circuits. It is also designed to be connected directly into a circuit board with no insulation, making it an ideal resistor for both prototyping and production circuits. The resistor is soldered directly onto the circuit board and can be used in multiple circuits connected in series or parallel. Overall, the RNC50H8661BSB14 Through Hole Resistor is a reliable resistor used in a variety of applications, from lighting to dimmers to power supplies. It is able to limit the current in a circuit, dissipate energy as heat, and fit on a circuit board thanks to its SMD package size. All of these features make it an ideal resistor for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description