RNC50H9760FSBSL

Series:	Military, MIL-PRF-55182/07, RNC50
Packaging:	Bulk
Part Status:	Active
Resistance:	976 Ohms
Tolerance:	±1%
Power (Watts):	0.1W, 1/10W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, like the RNC50H9760FSBSL, are primarily used to provide an electrical resistance in an electrical circuit. They can be found in a variety of applications, such as current sensing, voltage dividing, and transient protection circuits. Through hole resistors are also used in devices such as radios, amplifiers, and television sets.

RNC50H9760FSBSL Application Field

The RNC50H9760FSBSL through-hole resistor is widely used in low voltage circuits because it offers good stability, accuracy, and high power. This resistor is specified for general-purpose applications with a resistance of 5% and has a rated power of 350mW. It is perfect for providing a current path or adjusting voltage within a low voltage circuit.The RNC50H9760FSBSL is often found in consumer electronic devices, including stereos, television sets, and radios. In addition, it can also be found in industrial equipment, office equipment, medical, and measuring equipment.

RNC50H9760FSBSL Working Principle

Through-hole resistors work by providing a predetermined level of electrical resistance within a circuit. They are made from a number of thin wire strands or metal plates that are separated by an insulating material. The wire strands or metal plates determine the resistance.When the resistor is connected to a circuit, the amount of current passing through the resistor will be determined by the amount of resistance offered. The current passes through the resistor from one end to the other, but the resistance prevents it from reaching the full potential. This allows the circuit to be regulated and prevents overvoltage or current surges.The RNC50H9760FSBSL is made with a carbon film construction and features a flame-retardant coating. The coating helps to protect the resistor from electrical arcing and sparks while the carbon film insulation limits the amount of current passing through the resistor, thus reducing the risk of wire overheating or damages.

Conclusion

The RNC50H9760FSBSL through-hole resistor is perfect for providing a current path or adjusting voltage within a low voltage circuit. Its flame-retardant coating helps to protect the resistor from electrical arcing and sparks while the carbon film insulation limits the amount of current passing through the resistor. This makes it a great choice for a variety of applications, including consumer electronics, industrial equipment, office equipment, medical, and measuring equipment. It offers good stability, accuracy, and high power, making it a perfect choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description