RNC50J1840DSB14

Series:	Military, MIL-PRF-55182/07, RNC50
Packaging:	Bulk
Part Status:	Active
Resistance:	184 Ohms
Tolerance:	±0.5%
Power (Watts):	0.1W, 1/10W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-Hole Resistors: RNC50J1840DSB14

Through-Hole Resistors are one of the most common components used in electronic circuits. The RNC50J1840DSB14 is a type of resistor that is typically used in low power applications. It is a fixed resistor with an adjustable tolerance of ±20% and a maximum working voltage of 250V DC.The RNC50J1840DSB14 is an axial lead resistor. This means that the leads are oriented along the length of the resistor rather than at its ends. This makes them easy to use in circuits with limited space. It also ensures good contact between the lead and the substrate, which increases reliability.The RNC50J1840DSB14 is primarily used in low power applications, such as voltage regulation in mobile phones and other consumer electronics. It is also used to accurately control the flow of current in automotive circuits. The resistor is often mounted in a printed circuit board, as it offers better protection against environmental factors, as well as providing a more reliable connection.The RNC50J1840DSB14 operates on the principle of Ohm’s Law. This states that the current in a circuit is directly proportional to the voltage across it, with the resistor controlling the current by providing a predetermined voltage drop. This is achieved by the resistor’s resistive material (typically carbon, metal, or metal oxide films) between its two leads.When a voltage is applied across the leads of the RNC50J1840DSB14, a small amount of current will flow through it based on Ohm’s law. The amount of current flowing will depend on the value of the resistor, as well as the voltage applied across it. For example, if the resistor has a value of 18K ohms, and a voltage of 5V is applied across it, then a current of 0.278mA will flow through the resistor.The RNC50J1840DSB14 is a robust and reliable component which is suitable for a wide variety of applications. It offers reliable control of current in low power circuits, such as those found in consumer electronics and automotive systems. As the leads are oriented along the length of the resistor, rather than at its ends, it is easy to use in limited space. It is also protected from environmental factors when mounted on a PCB. Finally, its adjustable tolerance of ±20% ensures that it can be used to control the current with accuracy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description