RNC50J6120BSRE6

Series:	Military, MIL-PRF-55182/07, RNC50
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	612 Ohms
Tolerance:	±0.1%
Power (Watts):	0.1W, 1/10W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Through hole resistors are electrical components that are designed to reduce current flow by resistance. They are typically two-terminal components, and the area between the terminals is filled with a ceramic material that holds the metal and provides insulation. Through hole resistors are often used in printed circuit boards (PCBs) to reduce current flow at different points of the circuit. The RNC50J6120BSRE6 is a through hole resistor specifically designed for use in high frequency and power applications.

Characteristics
The RNC50J6120BSRE6 through hole resistor has a 50 Ohm resistance rating and is designed for use in high frequency and power applications. It has a power rating of 25W, a dielectric strength of 15kV and a tolerance of 1%. The resistor also has a minimum operating temperature of -55°C and a maximum operating temperature of 150°C. The RNC50J6120BSRE6 has a tolerance of 1% over a range of -55°C to +125°C. This allows for greater accuracy in circuit design and helps maintain signal stability.

Applications
The RNC50J6120BSRE6 through hole resistor can be used in a variety of applications. It is typically used in power electronics, power supplies, DC/DC converters, high-frequency inverters, and any other applications that require high frequency and power. It can also be used in RF circuits to reduce noise and improve EMI/EMC performance. The RNC50J6120BSRE6 is a robust component that is designed for use in high-temperature and harsh environment applications such as automotive and industrial applications.

Working Principle
The working principle of the RNC50J6120BSRE6 through hole resistor is fairly simple. The resistor works by reducing the current flow between two terminals. The resistor material is typically ceramic or a composite of ceramic and metal in order to minimize heat build-up and maintain tolerance. The resistance of the resistor is determined by its physical characteristics, such as its size and its material. When a voltage is applied across the two terminals of the resistor, current flows through it. The amount of current is proportional to the applied voltage, and the resistance of the resistor determines how much current is allowed to flow.

Conclusion
The RNC50J6120BSRE6 through hole resistor is an ideal component for use in high frequency and power applications. It has a high power rating and a wide operating temperature range, enabling it to be used in a variety of environments. Additionally, its tolerance of 1% ensures that the resistor can be used in precision circuits and keeps signal stability. The working principle of the resistor is fairly simple, and it works by reducing the current flow between two terminals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description