RNC50J7150BSRE6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are one of the most common types of resistors used in electronics. The RNC50J7150BSRE6 is a through hole resistor that is 64mm in length and 7mm in width. It is commonly used in industrial and military applications.

The RNC50J7150BSRE6 is a low temperature co-fired ceramic (LTCC) package resistor. It has a tolerance of ±5%, a maximum operating voltage of 55V and a temperature coefficient of 200ppm/°C. It is designed for use in high speed digital applications, and is capable of operating at frequencies up to 500Mhz. Its ceramic casing helps provide the resistor with enhanced thermal properties, allowing it to operate in high temperature environments.

The RNC50J7150BSRE6 is an axial, through hole resistor. It is constructed with two metal end caps that are connected by a ceramic core. The resistor is placed between the end caps and a wrapping of metal foil is applied to cover the entire assembly. The metal foil helps to reduce unwanted radiation and provides structural stability. The resistor is then soldered in place so that it is firmly connected to the circuit board.

In operation, the RNC50J7150BSRE6 works by converting electrical energy into heat energy. This is done by passing an electrical current through the resistor. The current flows through the resistor\'s metal end caps and through the ceramic core, heating the resistor up as it passes. The amount of heat generated by the resistor is determined by the amount of resistance it provides. The higher the resistance of the resistor, the more heat energy it will generate. This property of resistance is known as Ohm\'s law, and it is what allows the resistor to perform its task of regulating the amount of current flowing through a circuit.

The RNC50J7150BSRE6 is commonly used in high speed digital circuits, such as those found in computers and telecommunications equipment. It is also used for power regulation and in military applications. The RNC50J7150BSRE6\'s small size and high frequency response make it ideal for modern digital applications.

In summary, the RNC50J7150BSRE6 is a through hole resistor that is commonly used in industrial and military applications. It is a low temperature co-fired ceramic package resistor with a maximum operating voltage of 55V and a temperature coefficient of 200ppm/°C. Its small size and high frequency response make it ideal for use in high speed digital circuits. The resistor is constructed with two metal end caps connected by a ceramic core, and is soldered in place on a circuit board. The resistor works by passing an electrical current through it, converting the electrical energy into heat energy, which is regulated by its resistance.

The specific data is subject to PDF, and the above content is for reference