RNC55H1002BSRE6

Series:	Military, MIL-PRF-55182/01, RNC55
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	10 kOhms
Tolerance:	±0.1%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.250" L (2.39mm x 6.35mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Resistors are electrical components that regulate the flow of current in an electrical circuit. They limit the amount of current that can pass through a component and are found in almost every electrical device. Resistor construction can vary in size, power rating, package type and resistance value. One type of resistor is the through hole resistor.A through hole resistor is a general-purpose type of resistor which is made by winding a form of metal with a thin wire. Through hole resistors are the most common type of resistors. This type is usually mounted on a circuit board where its leads are connected to the other components.

RNC55H1002BSRE6 application field and working principle

The RNC55H1002BSRE6 is one of the Through Hole Resistors and has the following specifications: resistance value of 10K ohms ± 5%; 70V maximum operating voltage; 365mW power rating; 0.125°C/W thermal resistance. It has four terminals that are designed to fit through a circuit board. It also has a tin-plated steel case that helps to protect it from moisture and dust.The RNC55H1002BSRE6 works by limiting the amount of current that can pass through it. This is done by using the resistance value. When current passes through the resistor, energy is converted to heat. The thermal resistance of the resistor helps to dissipate the heat away from the device.The RNC55H1002BSRE6 is widely used in a variety of electronic applications. It is especially useful for controlling the current in low voltage devices, such as sensors and circuits that use surface-mounted components. It can also be used in applications that require a constant level of current, such as in timing and power supply circuits.

Conclusion

Through hole resistors are one of the most commonly used types of resistors. The RNC55H1002BSRE6 is one of the Through Hole Resistors with four terminals and tin-plated steel case. It is used in a variety of electronic applications, including low voltage devices, sensor circuits, timing and power supply circuits. It works by limiting the amount of current that can pass through it and converting energy to heat to help dissipate the heat away from the device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description