RNC55J1002BPBSL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, also known as thru-hole resistors, are the most common type of resistor, typically used when a more permanent installation is required than a surface mount resistor. Due to its durability, cost effectiveness, and consistency, this type of resistor finds wide application in various fields. One specifically popular type of thru-hole resistors is the RNC55J1002BPBSL.

RNC55J1002BPBSL Overview

The RNC55J1002BPBSL is a precision surface mount silicon resistor that is produced by Yageo, a notorious Taiwanese electronics manufacturer. Through the use of laser trimming technology, a tight tolerance to 1% +/- 10ppm/°C (maximum) classification can be achieved. The resistor itself is physically composed of a compact 0604 (1.6 x 0.8mm) SMD package, and the device itself is composed of NiNi (Nickel-Nickel) terminations, so soldering is done with conventional soldering fairly easily.

RNC55J1002BPBSL Application Field

Due to its preciseness and durability, the RNC55J1002BPBSL type of resistor is highly favored within the electrical engineering industry. It is highly sought after for applications that involve mixed-signal boards with arbitrary voltage circuits, especially within close-tolerance precision circuits. The resistor is also favored for its resistance to various environmental conditions such as high vibration, high temperature, and humidity. It is one of the preferred resistors for use in temperature shutoff controls, touch panel switches or microprocessor controls.

RNC55J1002BPBSL Working Principle

Through hole resistors work through passing a current throughout an electrolytic component consisting of two terminals that are approximately aligned to form a small gap. The current then passes over a specialized material which opposes the current that is being passed over it, heat is then generated, ultimately limiting the current that is passing over. The disparity between the two terminals ultimately determines the resistance between them. The RNC55J1002BPBSL works by utilizing a supplemental stabilizing resistor to support its micro-controller\'s stability during operations with higher load or during vital calibration periods.

Conclusion

Overall, it\'s clear why the RNC55J1002BPBSL is such a popular type of through hole resistor. Due its precision qualities, durableness, and utilitarian form factor, it boosts many fields of industrial and electrical engineering. It is no wonder that the RNC55J1002BPBSL is such a staple in its field.

The specific data is subject to PDF, and the above content is for reference