RNC55J2002BPRE6

Through Hole Resistors are one of the most widely used electronic components in the world. They come in many shapes, sizes, and types. One such type of Through Hole resistor is the RNC55J2002BPRE6. It has a specific application field and working principle.

Application Field

The RNC55J2002BPRE6 is primarily used as a voltage divider in a resistor network. Its two resistive leads are connected to two separate voltage levels, and it divides the total voltage between them. It is most commonly used in power supplies, analog-to-digital converters, and RF receivers. It is also used in communications circuits, medical imaging systems, and various control circuits. It is considered to be a reliable, cost-effective, and low-maintenance alternative to other, more complicated resistive components.

Working Principle

The RNC55J2002BPRE6 works on the principle of ‘Ohm’s Law’. This law states that voltage is equal to the current multiplied by the resistance. The RNC55J2002BPRE6 is composed of two resistive leads that are connected to two different voltage levels. When a current passes through the component, it divides the voltage between the two leads. The precise voltage division is determined by the resistance of the component, which is typically expressed in terms of ‘Ohms’.

The current passing through the component is also affected by the resistance. In general, the higher the resistance, the lower the current that will pass through the component. This in turn affects the voltage division between the two leads. By changing the resistance of the RNC55J2002BPRE6, engineers can control the voltage division between the two leads, enabling them to effectively control the amount of current passing through the component.

Conclusion

The RNC55J2002BPRE6 is a Through Hole resistor that is primarily used as a voltage divider in a resistor network. It works on the principle of ‘Ohm’s Law’, wherein its two resistive leads are connected to two separate voltage levels. By adjusting the resistance of the component, engineers can control the voltage division between its two leads, thereby controlling the current that passes through the component. It is a reliable, cost-effective, and low-maintenance alternative to other types of resistive components.