RNC55J2670BSRE6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors (THR) are a family of electric components used in circuits to regulate and control the flow of electricity. The RNC55J2670BSRE6 is a common type of THR widely used in a variety of electronic applications.

The RNC55J2670BSRE6 THR consists of a metal conductor, in this case a thin strip of nickel-chrome alloy, with a ceramic coating of resistive material. This resistive material is typically a carbon film which is applied to the surface of the metal conductor. The resistance of the resistor is determined by the size of the resistive material and the composition of the metal conductor. The metal conductor ensures that the resistor does not overheat as the current passes through it.

The RNC55J2670BSRE6 THR is a through-hole style resistor, meaning that it is mounted through a hole in the circuit board. It is then soldered into place and connected to the other components on the board. This type of resistor is very common in circuit boards used in computer systems, smartphones, and other consumer electronics.

The RNC55J2670BSRE6 THR has a maximum operating power of 55 W and a maximum voltage rating of 200 V. Its resistance range extends from 0.1 Ohm to 5.6 M Ohm. It has a tolerance of 5%, meaning that the actual resistance value may vary within 5% of the published value. Furthermore, it has a temperature coefficient of 0.05%/°C, which means that its resistance will be affected by changes in temperature.

The RNC55J2670BSRE6 THR is mainly used in circuits that require high current and voltage ratings, including power supplies, motor drives, and high voltage applications. It is also commonly used in audio amplifiers and other low noise circuits. The resistance value can be adjusted by selecting the appropriate resistive material, allowing for more precise control of the current flow.

The working principle of the RNC55J2670BSRE6 THR is simple. When electricity is passed through the resistor, the resistive material creates resistance to the flow of the current. This resistance limits the amount of current that is able to pass through. The resistance value determines how much current can pass through the resistor, and hence, the voltage dropped across it. As the current increases, more voltage is dropped across the resistor, thereby limiting the amount of current flowing through the rest of the circuit. For this reason, resistors are key components in any circuit that requires precise control of current and voltage.

The specific data is subject to PDF, and the above content is for reference