RNC55J33R2FRB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thru-Hole resistors are among the common electrical components used in different industrial automation circuits, both in the industrial and consumer markets. The choice of a resistor depends on its application and the function it performs. RNC55J33R2FRB14 is one such example of a thru-hole resistor used in a wide range of applications.

What is RNC55J33R2FRB14?

RNC55J33R2FRB14 is a fixed resistor of the thru-hole variety. It is a surface-mount component and distinguishes itself from conventional thru-hole resistors with its ability to be soldered on a circuit board\'s surface rather than through the holes in the board. This makes it possible to place the resistor accurately and quickly on the board. The physical characteristics of RNC55J33R2FRB14 are that it is a small size, 0.12" in diameter, and very light, weighing only 1.2 g. The component can dissipate maximum of 0.2 Watts of power and has a working voltage range of -55 to +125 volts.

RNC55J33R2FRB14 Applications

RNC55J33R2FRB14 is a thru-hole resistor used in several applications. It can be used as a termination resistor in high-frequency transmissions, allowing signal sources to emit the maximum power during transmission. Another use is as a pull-up resistor, which is used to draw a low-impedance line up to a high-impedance line and reducing power consumption. RNC55J33R2FRB14 is also used to control current in LEDs and as a current-limiting resistor. Moreover, this component can be used for power bridging, protection from voltage spikes, and in the design of several operational amplifiers.

How the RNC55J33R2FRB14 Works?

RNC55J33R2FRB14 is a through-hole resistor whose operation is mainly based on Ohm\'s Law. This law states that the amount of current running through a circuit is equal to the voltage divided by the resistance. Since it is a fixed resistor, its resistance is constant and does not decrease with time. RNC55J33R2FRB14 provides a constant resistance and is used to alter voltages in a circuit in order to control current and power. This is achieved by subtracting the voltage drop across the resistor from the total voltage, thus producing the desired current.

Conclusion

RNC55J33R2FRB14 is a surface-mountable thru-hole resistor that is capable of dissipating a maximum of 0.2 W and has a working voltage range of -55 to +125 V. It is used for a variety of applications such as termination resistors on high-frequency signals, pull-up resistors, current limiting resistors, and protection from voltage spikes. RNC55J33R2FRB14 works on the principle of Ohm\'s Law and provides a constant resistance as its resistance does not decrease with time.

The specific data is subject to PDF, and the above content is for reference