RNC55J3700BSRE6

Series:	Military, MIL-PRF-55182/01, RNC55
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	370 Ohms
Tolerance:	±0.1%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.250" L (2.39mm x 6.35mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through Hole Resistors have been used for many years in both analog and digital applications. With the introduction of newer technologies, the need for resistors with higher accuracy, power rating, and reliability has increased, making Through Hole Resistors an essential component for the modern engineer. One such device is the RNC55J3700BSRE6 resistor. This article will discuss the features and applications of this Through Hole Resistor, as well as their working principle.

Features and Applications of the RNC55J3700BSRE6 Resistor

The RNC55J3700BSRE6 resistor is a type of Through Hole Resistor. These resistors feature a small form factor, allowing for greater flexibility when designing and routing circuits. In addition, these resistors are power rated at 3W, meaning they can handle up to 3 watts of power without any additional components, making them suited for higher power applications. The RNC55J3700BSRE6 resistors also feature low drift, allowing them to be used with precision measuring circuits for accurate readings. These resistors are also highly reliable, as their operating temperature ranges from -55°C to +150°C, making them suitable for applications where durability is a must.Due to their ability to handle higher power ratings and their low drift, the RNC55J3700BSRE6 resistors are ideal for a wide variety of applications. They can be used in amplifier and actuator circuits, for example, to control the flow of energy. They can also be used in motor and boost circuits to regulate current flow. Additionally, these resistors are used in precision measuring circuits, such as those used in medical equipment or instrumentation, for precise readings. Finally, they are often used in test circuits, such as those used in test instrumentation, to simulate and detect faults in circuits.

Working Principle of the RNC55J3700BSRE6 Resistor

The RNC55J3700BSRE6 resistors operate on Ohm’s law. Ohm’s law states that the current in a circuit is directly proportional to the voltage. Therefore, when a voltage is applied to the resistor, the current will flow through it, and the amount of current will be determined by the resistance of the resistor.In the RNC55J3700BSRE6 resistor, there is a fireproof ceramic substrate which has two metal terminals on it. The resistor element is comprised of an array of metal strips that are stacked upon each other, connected in series, and bonded to the metal terminals. The resistance of the resistor is determined by the number of metal strips and their thickness, as well as the type of material used to create the metal strips.

Conclusion

The RNC55J3700BSRE6 resistor is a Through Hole Resistor and is ideally suited for a variety of applications. It features a small form factor, high power ratings, low drift, and high temperature operation, making it ideal for many different types of circuits. In addition, it operates on Ohm’s law, using an array of metal strips to regulate the current flow through the resistor. For these reasons, the RNC55J3700BSRE6 resistor is a popular choice for many engineers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description