Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Resistors are electrical elements used to reduce or limit current in a circuit. They have two terminals, one connected to the current source and the other to the load. Within the resistor, the electrical current is distributed throughout a resistive material, usually carbon or a metal-oxide film. Through-hole resistors are typically cylindrically or trapezoid-shaped components with three or four terminals. One of the terminals is the lead (or leg) that is inserted into a hole on the circuit board. The other two are the connection points for the resistor.

RNC55J9763BSRSL Application Field and Working Principle

The RNC55J9763BSRSL is a through-hole resistor that is primarily used in high-amperage, high-voltage applications, such as those found in motors, automotive, and power supply circuits. It works by changing the current flow through the circuit, thus regulating how much power is used. The resistive material within the resistor will heat up as current passes through it, and a greater amount of current will cause the material to heat up more. As the temperature increases, the amount of current decreases, thus limiting the power used.

The RNC55J9763BSRSL resistor has three terminals that are connected to one another: the first two provide connection points for the resistor, while the third is the lead that is inserted into the circuit board. Inside the resistor, two conducting materials (e.g. an oxide or metal-film) are separated by a dielectric material. When a voltage is applied to the resistor, current flows through the materials, generating heat. This heat dissipates quickly, allowing the resistor to maintain a stable resistance.

The RNC55J9763BSRSL is available in the following resistance values: 10 ohm, 20 ohm, 30 ohm, 50 ohm, 100 ohm, 200 ohm, 500 ohm, 1k ohm, 2k ohm, 3k ohm, 4k ohm, and 5k ohm. The wattage rating for the resistor ranges from 0.25 watts to 2 watts. It is a four-terminal resistor - the fourth terminal is the one that is inserted into the board. This makes the component more stable, and less likely to be affected by vibration or shock.

RNC55J9763BSRSL resistors are generally rated for 600V (Volt) or higher and can handle high inrush current. They are available in surface-mount, axial, and radial mount configurations. The main benefit of using the RNC55J9763BSRSL is that it can handle very high levels of current. It is also relatively inexpensive and offers a highly stable resistance value.

In conclusion, the RNC55J9763BSRSL is a through-hole resistor that is primarily used in high-amperage, high-voltage applications. It works by distributing current through a resistive material, typically a metal-oxide film or carbon, thus limiting the amount of power used. It is available in a variety of sizes and wattage ratings, and can be mounted in different configurations. The main benefit of using the RNC55J9763BSRSL is that it can handle very high levels of current and offers a highly stable resistance value at a relatively low cost.

The specific data is subject to PDF, and the above content is for reference