RNC60H1621FRB14

Series:	Military, MIL-PRF-55182/03, RNC60
Packaging:	Bulk
Part Status:	Active
Resistance:	1.62 kOhms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.097" Dia x 0.280" L (2.46mm x 7.11mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	R (0.01%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RNC60H1621FRB14 is a general purpose through-hole resistor that is widely used in variety of electronic circuits. The part is available in an industry standard 7/16 inch package.The RNC60H1621FRB14 is a resistor that is classified as a “through-hole” device. This means that it is placed on a printed circuit board and soldered with a “weld iron” to hold it in place. This resistor is available in various sizes from 0.1 ohms to 100 kilo-ohms, and is usually coded with a four digit marking which gives the resistance value in ohms.The RNC60H1621FRB14 is a general-purpose resistor, meaning that it is suitable for a wide variety of applications. It is typically used to limit the current, provide protection from high voltage, or set a voltage in a circuit. It is commonly found in power supplies, amplifiers, RF circuits, switching circuits, and motor drives.The working principle of the RNC60H1621FRB14 is based on Ohm’s Law, which states that the resistance of a conductor is equal to the voltage divided by the current, or R=V/I. This means that when a voltage is applied to the resistor, a current will travel through the component proportional to the voltage applied. The amount of current is determined by the resistance value of the resistor; the greater the resistor value, the less current will flow. The current limitation of the RNC60H1621FRB14 is determined by the material of the internal resistor element. Many through-hole resistors use carbon composition, which is a mixture of carbon, graphite, and other materials. This material allows the resistor to dissipate power in the form of heat as the current increases through the component, preventing any damage to other components in the circuit. The RNC60H1621FRB14 is also subject to variations in the environment; including temperature, humidity and mechanical stress. This resistance can change over time as components age, or when they are exposed to a changing environment. It is important to note that if the thermal coefficient is too high the resistance can be affected by just a slight change in temperature.In conclusion, the RNC60H1621FRB14 is a general-purpose through-hole resistor that is widely used in variety of applications. The part is available in an industry standard 7/16 inch package, and is designed to limit the current, provide protection from high voltage, or set a voltage in a circuit. It is based on the principles of Ohm’s Law, and its current limitation is determined by the internal resistor element, which may be subject to variations in the environment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description