RNC60H3202DSRE6

Series:	Military, MIL-PRF-55182/03, RNC60
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	32 kOhms
Tolerance:	±0.5%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.097" Dia x 0.280" L (2.46mm x 7.11mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components used in electrical circuits that limit current flow, adjust signal level, and divide voltages. They also act as sensors of electrical power levels and can provide protection against excess power.The RNC60H3202DSRE6 is one type of through hole resistor commonly used in industrial and commercial applications. This resistor is designed to provide high resistance and low voltage drop in a wide range of applications, making it ideal for power electronics.This resistor follows a basic design that is used in many through hole resistors, with a single element of resistance in a cylindrical body. The element is constructed of either carbon or metal, depending on the power levels being dealt with. The cylindrical body allows a connection wire to be soldered onto the side of the resistor element, allowing it to be connected to the circuit.The resistor is rated to handle up to 3.2W of power, with a maximum of 40V DC and a maximum voltage drop of 100mV. This makes it suitable for power electronics applications such as power supplies, motor drives, and invertors. It is also suitable for high current applications such as automotive systems and LED lighting.In terms of its application field, the resistor is mainly used in power electronics applications to provide high resistance and low voltage drop, both at relatively low power levels and high current outputs. The resistor can also be used in automotive and LED lighting applications.In terms of its working principle, through hole resistors make use of the basic principles of electrical conduction. When a voltage is applied to one end of the resistor, electricity passes through a resistive material which causes the current to slow down and the voltage to drop. This resistance is then dissipated as heat, which then needs to be dissipated in order to prevent the resistance from increasing too much and the voltage from dropping too low.The RNC60H3202DSRE6 is a through hole resistors which is designed to handle relatively high currents and still provide adequate resistance and voltage drop. It is an ideal choice for power electronics applications and also suitable for use in automotive and LED lighting applications. By understanding its application field and working principle, engineers are able to benefit from its efficient operation and reliable performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description