RNC60J1210FSRE6

Series:	Military, MIL-PRF-55182/03, RNC60
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	121 Ohms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.097" Dia x 0.280" L (2.46mm x 7.11mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

THROUGH HOLE RESISTORSThrough hole resistors are one of the most widely used and commercially available electronic components. The RNC60J1210FSRE6 is one such through-hole resistor, which is specifically designed for resistive load applications. This resistor is usually keyed with two lead pins at the sides to make sure that the resistor is placed in the right position. It has a high temperature capability rating and is suitable for slim high-density mounting requirements.The RNC60J1210FSRE6 is usually used in automotive, communication, and consumer electronics, circuit board design, robotics, and electrical system design. This resistor is used to serve as a static circuit element used to control and reduce the current flow in an electric circuit. They are also used to fix currents or voltages at particular levels for AC or DC current flows and to protect sensitive devices from being overloaded by excessive current flow.
WORKING PRINCIPLE
The basic principle of a resistor is that the current flowing through it is inversely proportional to the resistance. The behavior of a resistor is determined by the Ohm\'s law. According to this law, the current through a resistor is directly proportional to the applied potential difference. If the voltage increases, the current flowing through the resistor will also increase. The resistance of the resistor is given by Ohm\'s law is:R = V/I
where V is the potential difference applied to the resistor, and I is the current flowing through the resistor.
In the case of the RNC60J1210FSRE6, the resistance is 10 Ohms, and the maximum operating voltage is 600 volts. This implies that the current flowing through this component varies with the voltage as per the above equation. Therefore, the current flowing through the RNC60J1210FSRE6 is usually proportional to the applied voltage.
The RNC60J1210FSRE6 is typically used in circuits where small current flow is required. It can be used in applications where circuit protection is required, such as in the case of motors and other electromechanical components. It is also used for AC noise suppression and voltage regulation. This resistor can be used in either tight or wide temperature range applications, depending on the current required.
CONCLUSION
The RNC60J1210FSRE6 is a popular through-hole resistor that offers a high temperature capability, a fixed resistance value, and many applications in both tight and wide temperature range applications. Its many advantages make it a popular choice for a variety of applications. With its robust design and low cost, the RNC60J1210FSRE6 is a great choice for any electronic circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description