RNC60J2742DSR36

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are used in a variety of applications to facilitate the control of electric current flow. They are also used as part of a circuit’s protection system, protecting components of a circuit from overload and damage. In extreme cases, they are used to limit current to a safe level that will not damage delicate components of the circuit. One specific through-hole resistor that is commonly used is the RNC60J2742DSR36.

RNC60J2742DSR36 through-hole resistors are commonly used in power converters, power supplies and other switching applications. It\'s a commonly used metal oxide film resistor with a maximum working voltage of 600V and a maximum overload voltage of 800V. It\'s resistive value can be adjusted depending on the application. It has a maximum power rating of 0.15W-6W, with a temperature coefficient of 50PPm/°C, an insulation resistance of 100MOhm and a thermal cooperance of 10.4MK/W. This type of resistor helps stabilize the voltage in the circuit and helps to reduce interference from other components and outside sources.

The working principle of the RNC60J2742DSR36 through-hole resistor is based on the fact that it has a specific controlled amount of resistance between its two endpoints. This resistance is created by a thin film of oxidized metal on a substrate material. This film is what causes the current to drop according to Ohm\'s Law. The metal film is further protected from dirt, moisture and other environmental elements by a cover of epoxy lacquer. Despite its small size, this resistor is able to handle large amounts of power without getting overheated.

This specific resistor has a number of advantages over other through-hole resistors. It is small and lightweight, making it easy to install in cramped locations. Additionally, its small size makes it easy to replace if it becomes damaged. It is also highly reliable and provides precision control of electric current. Finally, it does not require much maintenance or external cooling.

In summary, the RNC60J2742DSR36 through-hole resistor is a powerful and reliable component used for controlling electric current flow in power converters, power supplies, and other switching applications. It has a maximum working voltage of 600V and a maximum overload voltage of 800V, as well as a maximum power rating of 0.15W-6W. It’s simple construction and lack of external cooling make it an efficient and cost-effective solution for controlling voltage in a variety of applications.

The specific data is subject to PDF, and the above content is for reference