RNF12FTD412K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Though hole resistors are one of the most useful components in the electronics industries. They are typically used for low- or no-voltage applications, such as a power resistor or a high-value series resistor. They are also used in high voltage applications such as lightning arrestors and high frequency protection. RNF12FTD412K is a through hole resistor used in a variety of applications. This article will describe the application field and working principle of RNF12FTD412K.

RNF12FTD412K is an LED-based through hole resistor. It works by using an LED light (LNED) as the source of current, which is then converted to a voltage (VIN) through a resistive element (R). The RNF12FTD412K can be used in two different operating modes, the linear mode and the non-linear mode. In the linear mode, the current is directly proportional to the voltage; while in the non-linear mode, the current is not proportional to the voltage.

In the linear mode, RNF12FTD412K is used to limit current, ensure stable voltage, and prevent electric shock. It can also be used to provide protection against excessive current. The operating temperature range of this resistor is -55℃ to +150℃. The resistance of RNF12FTD412K varies from 10Ω to 1KΩ.

RNF12FTD412K is also used for high frequency protection. In this application, it is used as a lightning arrestor where the voltage is high enough to cause a spark and activate the resistor. The resistor then releases its energy in the form of heat, thus dissipating the surge quickly and safely. The resistor also resists high frequency interference, thereby protecting from interference. Additionally, RNF12FTD412K can be used to reduce noise and provide protection against static discharge.

RNF12FTD412K is also used to regulate current in switching devices such as LEDs, FETs, and diodes. In this application, the resistor is placed in parallel with the device to control the amount of current and voltage supplied to the device. Consequently, the device’s performance and longevity are improved.

The working principle of RNF12FTD412K involves the conversion of current to voltage. As previously mentioned, an LED light is used as the source of current. This current is routed through a resistive element which creates a voltage drop. This voltage is then used to power the device that the resistor is connected to. Since the voltage is controlled, the current output from the resistor is also regulated.

In conclusion, RNF12FTD412K is a through hole resistor with a wide range of application fields. It is used to limit current, protect from electric shock, reduce noise, regulate current in switching devices, and provide high frequency protection. Its working principle involves the conversion of current to voltage.

The specific data is subject to PDF, and the above content is for reference