RNF14FAD6K98

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components used to reduce electrical current, adjust signal levels, divide voltages, and provide bias to active devices such as transistors. RNF14FAD6K98 is one of them.

The resistor has two rounded pins that are inserted into holes drilled in the circuit board. This type of resistor is designed to stay in one place and is not fastened to the board. It is usually specified by its electrical resistance, also called Ohmic value. The standard resistance range of the RNF14FAD6K98 is from 0.005 ohms to 10M ohms. When current goes through the resistance of the resistor, a voltage drop is produced. This voltage drop has a fixed value because the resistance of the resistor is constant.

RNF14FAD6K98 has many applications. It is often used in power supplies, voltage regulators, amplifiers, oscillators, and filters. In power supplies, the resistor helps limit the current through the transistor. The transistor is then able to maintain a steady voltage, thus providing a reliable voltage to the load. In voltage regulators, the resistor helps reduce overvoltage and overcurrent. It can also be used in amplifiers to reduce noise and increase stability. In oscillators, the capacitor and resistor help provide the necessary feedback required for the efficient operation of the oscillator. In filters, the resistor helps reduce radio-frequency interference and prevent damage to the system.

The working principle of RNF14FAD6K98 is simple and straightforward. When current goes through the resistor, a voltage drop is produced across the resistor. This voltage drop is directly proportional to the resistance of the resistor. For example, if the resistance is doubled, the voltage drop is also doubled. The resistor also produces heat when current flows through it. This heat must be dissipated to prevent it from damaging the components.

RNF14FAD6K98 is an important component in a variety of electronic circuits. It helps to reduce the current passing through the circuit, reduce noise, and provide feedback for oscillators and filters. It is also used to adjust signal levels, divide voltages, and provide bias to active devices such as transistors. The resistor can also be used to provide current limiting and overvoltage protection.

The specific data is subject to PDF, and the above content is for reference