RNR55J1000FSB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors, including the RNR55J1000FSB14 type, are essential components in electrical engineering and electronic circuits. The purpose of the resistor is to reduce current flow, adjust signal and voltage level, to divide voltages, or to terminate lines and dissipate power in circuits. Resistance values across a range of resistance values from very low resistances of tens of milliohms to 11 megaohms and upwards are available.

The RNR55J1000FSB14 is a through hole resistor. Its specific properties should be noted such as its power rating, +/-0.5% tolerance, and 1k resistive value. Moreover, its power rating is 1/4 watts. A power rating of 1/4 watt is the highest wattage rating for most axial resistors. So they are often exempt from derating rules for higher wattage resistive components.

Its main application is to help with current and voltage level control and regulation. Its working principle is simple, and as previously mentioned, it blocks a certain amount of the current in a circuit. The lower the value of the resistor, the higher is the current blocked. In other words, current is inversely proportional to resistor value. The resistor itself consists of a resistive element and a pair of leads. When current flows through the resistive element, it is reduced to a certain level, depending on the ohmic value of the resistor, and then it exits the resistor through the leads.

In addition to this type of resistor, there are many other types out there. A notable category is the Surface Mount Resistor, which is designed to be mounted on a flat surface such as a printed circuit board. The other types of resistors include wire-wound resistors, metal oxide film resistors, temperature-dependent resistors and non-linear resistors. Each type has its own unique advantages and disadvantages, and should be chosen wisely based on the requirements of a circuit.

In conclusion, the RNR55J1000FSB14 through hole resistor is a critical component in electrical and electronic systems, primarily used to reduce current flow, adjust signal levels, divide voltages, or to terminate lines and dissipate power. Its working principle is based on the fact that current is inversely proportional to the resistor value. Additionally, it is important to note that there are many different types of resistors out there, each with their own unique advantages and disadvantages.

The specific data is subject to PDF, and the above content is for reference