ROV20H431K-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) is a type of varistor or metal-oxide varistor (MOV), which is widely used in safeguard electrical or electronic circuits from overvoltage. ROV20H431K-2 is the type of TVS, which is specially designed for protection against surges, spikes and transients. It has very low capacitance and fast response time.

The application of the ROV20H431K-2 includes telecom and network system protection, Automotive electronic circuits, consumer electronics, data processing, telecommunications and audio/video applications. It is designed for maximum ESD protection in automotive electronic devices against electrostatic discharge (ESD) and to protect the frequency of communications and other digital signals from interference.

The ROV20H431K-2 is a low capacitance protection device with fast response time, which is designed for protection against transient overvoltage and high-frequency pulses. It is a bidirectional device, which is capable of suppressing both positive and negative transients. It also offers low insertion loss, wide operating temperature range, and low leakage current. The device is made up of silicon oxide layer, which is thin enough to provide a large surface area for protection. The silicon oxide layer acts as a barrier to the high voltage transients, which in turn helps to reduce the risk of damage to the device.

The ROV20H431K-2 has a special structure, which helps to reduce the leakage current and prevents any further damage to the device in case of a surge or spike. The device also has an internal thermal protection, which helps in reducing the risk of any further damage to the device in case of extended exposure to high voltages. The device is also designed to provide high surge rating, high bandwidth, low impedance, and low leakage current.

In order to understand the working principle of the ROV20H431K-2, it is important to have a good understanding of the two main components used in this type of device. The first part is the diode, which is used for rectification of the high voltage transients. The second component is the resistor, which acts as a voltage limiter by dissipating the energy of the surge or spike. The resistor can be used in either a series or shunt configuration depending on the application and the required level of protection.

The diode works by allowing a current to flow in one direction only, which prevents the surge or spike from causing any damages to the protected device. When the diode is forward biased, it acts as a barrier to the transient and prevents it from entering the protected device. The resistor works by dissipating the energy of the surge or spike before it can breach the diode. It also acts as a short circuit if the transient is greater than the maximum voltage the diode can withstand.

The working principle of the ROV20H431K-2 is then based on the two main components, the diode and the resistor. The combination of these two components helps to provide the desired level of protection in various applications. It is important to note that the device should be carefully chosen to meet the specific requirements of the application in order to ensure optimum protection and reliable performance.

The specific data is subject to PDF, and the above content is for reference