| Allicdata Part #: | RP-093.3S-ND |
| Manufacturer Part#: |
RP-093.3S |
| Price: | $ 7.48 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | RECOM Power |
| Short Description: | DC DC CONVERTER 3.3V 1W |
| More Detail: | Isolated Module DC DC Converter 1 Output 3.3V 3... |
| DataSheet: |  RP-093.3S Datasheet/PDF |
| Quantity: | 1000 |
| 25 +: | $ 6.80400 |
| Current - Output (Max): | 303mA |
| Size / Dimension: | 0.77" L x 0.28" W x 0.40" H (19.7mm x 7.1mm x 10.2mm) |
| Package / Case: | 7-SIP Module, 4 Leads |
| Mounting Type: | Through Hole |
| Efficiency: | 70% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | SCP |
| Applications: | ITE (Commercial), Medical |
| Voltage - Isolation: | 5.2kV |
| Power (Watts): | 1W |
| Series: | ECONOLINE RP |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 3.3V |
| Voltage - Input (Max): | 9.9V |
| Voltage - Input (Min): | 8.1V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC-DC converters are widely used in modern power systems to transform DC power levels or to convert between different DC power levels. They are used in a variety of electrical applications, including motor voltage input regulation, ripple damping, filter capacitors, interruptor circuit, inrush current limiting, input and output overvoltage protection, phase control, protection from short-circuit and fast current change. The most common type of DC-DC converter is the buck or \'step down\' converter. This type of converter provides a regulated output voltage that is lower than the input voltage.
The RP-093.3S DC-DC converter is a high efficiency, 3 phase buck converter designed to operate on a range of input voltage levels and provide a regulated output voltage. It is ideal for converter-fed motor drives applications, and can handle a wide range of input voltages from 36V to 160V while providing a regulated output voltage of 12V to 48V. It has a no-load, continuous current rating of 3A and a peak current rating of 6A.
The RP-093.3S converter is equipped with a built-in over-temperature protection circuit, which reduces the output voltage to a safe operating value if the temperature exceeds a preset level. The converter also features an over-voltage protection circuit, which reduces the output voltage if the input voltage exceeds 180V. A voltage feedback signal is provided, allowing the device to be operated in a locked-loop mode for further regulation accuracy.
The RP-093.3S converter also uses a lossless current sensing technique for more efficient operation. The power stage employs MOSFET switches, which have a low on-resistance and operate at high switching frequencies, providing a high efficiency power conversion. The results are higher power efficiency and greater system reliability.
The RP-093.3S DC-DC converter supports a wide range of input and output voltages, allowing it to be used in a variety of applications, such as DC motor drives, power supplies, battery chargers, and other industrial control systems. The device also features high efficiency, high-power, low noise operation, which makes it suitable for use in a wide variety of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...